3485S519-501

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Body Length

  0.812 inches maximum

• Shaft End Play

  0.005 inches

• Power Dissipation Rating Per Section In Watts

  1.5 free air single section

• Undercut Diameter

  0.975 inches maximum

• Section Quantity

  1

• Undercut Width

  0.0570 inches minimum

• Test Data Document

  06424-2606561 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Function Characteristic Per Section

  single section linear

• Shaft Length

  0.875 inches nominal

• Pilot Diameter

  0.9683 inches minimum and 0.9688 inches maximum

• Shaft Runout

  0.001 inches

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -50.0/+50.0 single section

• Maximum Starting Torque

  0.50 inch-ounces

• Terminal Location

  radially positioned over less than half the circumference

• Mounting Method

  clamp ring

• Maximum Running Torque

  0.30 inch-ounces

• Function Conformity Tolerance Per Section

  -0.50/+0.50 single section

• Mounting Lip Diameter

  1.2500 inches maximum

• Reliability Indicator

  not established

• Actuator Type

  single shaft

• Pilot Length

  0.0620 inches nominal

• Terminal Type And Quantity

  3 solder stud

• Shaft Radial Play

  0.002 inches

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Shaft Diameter

  0.1245 inches minimum and 0.1250 inches maximum

• Resistance Tolerance Per Section In Percent

  -3.0/+3.0 single section

• Lateral Runout

  0.001 inches

• Body Style

  cylindrical servo mounted

• Shaft Style

  round

• Overall Length

  1.718 inches maximum

• Pilot Diameter Runout

  0.001 inches

• Electrical Resistance Per Section

  500.0 ohms single section

• Effective Electrical Rotation In Deg Angular Rotation

  350.0 nominal

• Mechanical Backlash In Deg Angular Rotation

  0.25

• Overall Diameter

  1.562 inches maximum

• Mounting Lip Depth

  0.0620 inches nominal

• Function Conformity Per Section

  single section independent linearity

• Body Diameter

  1.250 inches maximum

• Rotary Actuator Travel In Angular Deg

  350.0 minimum and 358.0 maximum