381-1848-010

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Overall Length

  1.907 inches minimum and 1.989 inches maximum

• Terminal Location

  longitudinally positioned on the circumference

• Shaft End Play

  0.00500 inches

• Shaft Bearing Type

  ball

• Power Dissipation Rating Per Section In Watts

  3.0 free air single section

• Electrical Resistance Per Section

  11.250 kilohms single section

• Function Conformity Per Section

  single section independent linearity

• Shaft Runout

  0.002 inches

• Section Quantity

  1

• Function Characteristic Per Section

  single section linear

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Function Conformity Tolerance Per Section

  -0.25/+0.25 single section

• Mounting Lip Diameter

  0.8700 inches minimum and 0.8800 inches maximum

• Shaft Length

  0.344 inches minimum and 0.406 inches maximum

• Maximum Starting Torque

  0.40 inch-ounces

• Mounting Lip Depth

  0.0570 inches minimum and 0.0670 inches maximum

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  105.0 single section

• Mounting Method

  clamp ring

• Maximum Running Torque

  0.30 inch-ounces

• Pilot Diameter Runout

  0.00200 inches

• Reliability Indicator

  not established

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 nominal

• Actuator Type

  single shaft

• Pilot Diameter

  0.6245 inches minimum and 0.6250 inches maximum

• Shaft Radial Play

  0.002 inches

• Maximum Stop Torque

  100.00 inch-ounces

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Resistance Tolerance Per Section In Percent

  -3.0/+3.0 single section

• Rotary Actuator Travel In Angular Deg

  3600.0 nominal

• Test Data Document

  13499-381-1848-010 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Body Style

  cylindrical servo mounted

• Undercut Diameter

  0.6245 inches minimum and 0.625 inches maximum

• Shaft Diameter

  0.1245 inches minimum and 0.1248 inches maximum

• Body Diameter

  0.870 inches minimum and 0.880 inches maximum

• Terminal Type And Quantity

  3 tab, solder lug

• Shaft Style

  round

• Overall Diameter

  1.026 inches minimum and 1.068 inches maximum

• Undercut Width

  0.0630 inches minimum and 0.0730 inches maximum

• Body Length

  1.563 inches minimum and 1.583 inches maximum