MIL-R-94/5

Technical Characteristics

• Section Quantity

  1

• Shaft Diameter

  0.248 inches minimum and 0.251 inches maximum

• Shaft Length

  0.844 inches minimum and 0.906 inches maximum

• Mounting Bushing Length

  0.485 inches minimum and 0.515 inches maximum

• Shaft Style

  3c round, slotted

• Effective Electrical Rotation In Deg Angular Rotation

  309.0 minimum and 320.0 maximum

• Fragility Factor

  moderately rugged

• Screw Thread Diameter

  0.375 inches nominal

• Screw Thread Quantity Per Inch

  32.0

• Resistance Temp Characteristic Range Per Section In Percent

  -3.0 to 0.0 -55 deg celsius single section and -5.0 to 10.0 -25 deg celsius single section and -5.0 to 10.0 25 deg celsius single section and 0.0 to 3.0 120 deg celsius single section

• Power Dissipation Rating Per Section In Watts

  1.0 free air single section

• Actuator Travel Control Feature

  stops

• Test Data Document

  81349-mil-r-94 specification

• Body Style

  1b cylindrical bushing mounted

• Reliability Indicator

  not established

• Body Diameter

  1.032 inches minimum and 1.156 inches maximum

• Body Length

  0.468 inches minimum and 0.656 inches maximum

• Actuator Type

  single shaft

• Maximum Starting Torque

  6.00 inch-ounces (ounce-inches)

• Maximum Running Torque

  1.00 inch-ounces (ounce-inches)

• Maximum Stop Torque

  30.00 inch-ounces (ounce-inches)

• Nonturn Device Location

  at 9 oclock

• Nonturn Device Radius

  0.497 inches minimum and 0.529 inches maximum

• Screw Thread Series Designator

  unef

• Terminal Location

  radially positioned over less than half the circumference

• Mounting Method

  locking bushing

• Electrical Resistance Per Section

  200.0 ohms single section

• Rotary Actuator Travel In Angular Deg

  309.0 minimum and 320.0 maximum

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  120.0 single section

• Resistance Tolerance Per Section In Percent

  -10.0 to 10.0 single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Standard Taper Curve Per Section

  c single section

• Terminal Type And Quantity

  3 tab, solder lug

• Specification/Standard Data

  81349-mil-r-94/5 government specification