BACC182L10A

Technical Characteristics

• Internal Trip Release Configuration

  series trip all locations

• Storage Type

  general purpose warehouse

• Body Width

  2.250 inches maximum

• Test Data Document

  81205-bacc182l10a drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Fragility Factor

  moderately rugged

• Pole Quantity

  3

• Circuit Protection Type

  overcurrent all locations

• Thread Series Designator

  unc

• Reset Method

  manual

• Trip Release Characteristic

  time delay all locations

• Actuator Function

  trip-reset

• Precious Material

  silver

• Trip Delay Time In Seconds Per Rated Continuous Current

  10.000 minimum at 200 pct all locations and 65.000 maximum at 200 pct all locations

• Thread Quantity Per Inch

  32

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

  0.735 inches minimum and 0.751 inches maximum

• Manual Actuator Type And Quantity

  1 push-pull

• Actuator Position Designation

  at pole two

• Mounting Facility Type And Quantity

  6 threaded hole

• Body Style

  multipole-single actuator type

• Maximum Continuous Load Current Rating Per Pole

  10.0 amperes ac all locations

• Trip Release Ambient Temp Rating

  25.0 deg celsius nominal all locations

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  150.0 all locations

• Nominal Thread Size

  0.138 inches

• Main Contact Tripping Mechanism Type

  trip free

• Body Length

  2.200 inches maximum

• Terminal Type And Quantity

  6 screw

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  1500.0 ac all locations

• Inclosure Protection Type For Which Designed

  general purpose

• Body Height

  2.125 inches maximum

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

  1.780 inches minimum and 1.840 inches maximum

• Frequency In Hertz

  400.0 all locations

• Precious Material And Location

  terminal surfaces silver

• Unpackaged Unit Weight

  0.500 pounds

• Center To Center Distance Between Terminals Parallel To Width

  0.735 inches minimum and 0.751 inches maximum

• Bushing Length

  0.220 inches minimum and 0.280 inches maximum

• Center To Center Distance Between Terminals Parallel To Length

  1.471 inches minimum and 1.501 inches maximum

• Operating Voltage Type And Rating Per Pole In Volts

  200.0 ac all locations

• Case Material

  plastic

• Trip Release Method

  thermal all locations