G395822-4

Technical Characteristics

• Pilot Diameter Runout

  0.001 inches

• Overall Diameter

  0.956 inches minimum and 1.109 inches maximum

• Terminal Type And Quantity

  3 tab, solder lug

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Mounting Bushing Length

  0.313 inches nominal

• Shaft Length

  0.813 inches nominal

• Mechanical Backlash In Deg Angular Rotation

  1.5

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -70.0/+70.0 single section

• Shaft Radial Play

  0.002 inches

• Shaft Diameter

  0.125 inches nominal

• Lateral Runout

  0.002 inches

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Screw Thread Series Designator

  unef

• Function Conformity Tolerance Per Section

  -0.50/+0.50 single section

• Mounting Method

  standard bushing

• Terminal Location

  radially positioned over less than half the circumference

• Function Characteristic Per Section

  single section linear

• Maximum Stop Torque

  80.00 inch-ounces

• Screw Thread Diameter

  0.250 inches nominal

• Contact Arm Electrical Off Position

  fully ccw

• Nonturn Device Radius

  0.245 inches minimum and 0.255 inches maximum

• Section Quantity

  1

• Overall Length

  2.469 inches maximum

• Shaft Runout

  0.002 inches

• Screw Thread Quantity Per Inch

  32.0

• Actuator Travel Control Feature

  stops

• Shaft End Play

  0.005 inches

• Maximum Running Torque

  0.60 inch-ounces

• Body Diameter

  1.625 inches maximum

• Rotary Actuator Travel In Angular Deg

  3600.0 minimum and 3610.0 maximum

• Power Dissipation Rating Per Section In Watts

  2.0 free air single section

• Body Style

  cylindrical bushing mounted

• Shaft Style

  round, slotted

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 minimum and 3610.0 maximum

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  80.0 single section

• Function Conformity Per Section

  single section independent linearity

• Nonturn Device Location

  at 12 oclock

• Electrical Resistance Per Section

  1.0 kilohms single section

• Maximum Starting Torque

  0.70 inch-ounces

• Test Data Document

  01714-g395805 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Body Length

  0.843 inches minimum and 0.906 inches maximum