40076-19

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Maximum Stop Torque

  128.00 inch-ounces

• Terminal Type And Quantity

  3 turret

• Power Dissipation Rating Per Section In Watts

  1.5 free air single section

• Terminal Location

  longitudinally positioned on the circumference

• Maximum Running Torque

  0.60 inch-ounces

• Body Style

  cylindrical bushing mounted

• Actuator Type

  double ended shaft

• Electrical Resistance Per Section

  10.0 kilohms single section

• Body Length

  1.457 inches nominal

• Function Conformity Per Section

  single section independent linearity

• Overall Length

  2.644 inches nominal

• Screw Thread Quantity Per Inch

  32.0

• Section Quantity

  1

• Maximum Starting Torque

  0.60 inch-ounces

• Shaft Diameter

  0.249 inches nominal

• Function Characteristic Per Section

  single section linear

• Function Conformity Tolerance Per Section

  -0.25/+0.25 single section

• Shaft Runout

  0.001 inches

• Mounting Method

  standard bushing

• Shaft Radial Play

  0.003 inches

• Mounting Bushing Length

  0.250 inches nominal

• Lateral Runout

  0.003 inches

• Screw Thread Series Designator

  unef

• Reliability Indicator

  not established

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 nominal

• Shaft Length

  0.375 inches minimum and 0.812 inches maximum

• Body Diameter

  0.875 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Resistance Tolerance Per Section In Percent

  -3.0/+3.0 single section

• Rotary Actuator Travel In Angular Deg

  3600.0 nominal

• Pilot Diameter Runout

  0.00100 inches

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -0.0/+130.0 single section

• Shaft End Play

  0.0085 inches

• Shaft Style

  round

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  85.0 single section

• Test Data Document

  11189-40076 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Screw Thread Diameter

  0.375 inches nominal

• Shaft Bearing Type

  sleeve

• Overall Diameter

  1.188 inches maximum