302-5006

Technical Characteristics

• Mounting Lip Diameter

  1.99500 inches minimum and 2.00500 inches maximum

• Shaft Diameter

  0.2494 inches minimum and 0.2497 inches maximum

• Body Diameter

  1.995 nominal mils and 2.005 nominal centimeters

• Shaft Runout

  0.002 inches

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  175.0 6th section

• Mounting Method

  clamp ring

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -50.0/+50.0 all sections

• Terminal Location

  radially positioned over less than half the circumference

• Pilot Diameter

  1.87400 inches minimum and 1.87500 inches maximum

• Power Dissipation Rating Per Section In Watts

  0.5 7th secondary at 10'30 oclock

• Undercut Width

  0.06000 inches minimum

• ~1

  drop siding and 10.0 percent, rated amperes c fi

• Electrical Resistance Per Section

  5.0 percent, rated amperes c and better v.g. stepping and 10.0 percent, rated amperes c and better select and 5.0 percent, rated amperes c and better finish and 5.0 percent, rated amperes c and better industrial clears and 5.0 percent, rated amperes c

• Actuator Travel Control Feature

  stops

• Pilot Length

  0.05700 inches minimum and 0.06700 inches maximum

• Tap Location Tolerance Per Section

  -2.0/+2.0 deg angular rotation 6th section

• Rotary Actuator Travel In Angular Deg

  350.0 nominal

• Shaft Bearing Type

  ball

• Body Length

  3.630 inches maximum

• Section Quantity

  6

• Shaft Length

  0.440 inches minimum and 0.480 inches maximum

• Mounting Lip Depth

  0.08800 nominal mils and 0.09800 nominal centimeters

• Effective Electrical Rotation In Deg Angular Rotation

  350.0 nominal

• Pilot Diameter Runout

  0.001 inches

• Shaft Style

  round

• Fixed Tap Quantity Per Section

  1 6th section

• Function Conformity Per Section

  all sections absolute conformity

• Shaft Radial Play

  0.0008 inches

• Shaft End Play

  0.001 inches

• Body Style

  cylindrical servo mounted

• Lateral Runout

  0.001 inches

• Maximum Running Torque

  4.00 inch-ounces

• Function Conformity Tolerance Per Section

  -0.10/+0.10 3rd section and -0.04/+0.04 1st section and -0.10/+0.10 4th section and -0.10/+0.10 5th section and -0.10/+0.10 2nd section and -0.10/+0.10 6th section

• Test Data Document

  70210-805101 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 1st section and -5.0/+5.0 2nd section and -10.0/+10.0 3rd section and -5.0/+5.0 4th section and -5.0/+5.0 5th section and -5.0/+5.0 6th section

• Function Characteristic Per Section

  6 oclock 11th primary

• Terminal Type And Quantity

  19 turret

• Actuator Type

  single shaft

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  125.0 all sections

• Reliability Indicator

  not established

• Undercut Diameter

  1.875 inches maximum

• Maximum Starting Torque

  4.00 inch-ounces