220561F3

Technical Characteristics

• Special Features

  sect. 1 rear has 1 dummy terminal,sect. 2 rear has 1 dummy terminal,sect. 3 rear has 2 dummy terminals

• Pole Quantity

  2 3rd section rear

• Contact Voltage Rating In Volts

  28.0 dc at sea level

• Nonturn Device Radius

  0.510 inches minimum at 3:00 o'clock and 0.550 inches maximum at 3:00 o'clock

• Shaft Length

  0.730 inches minimum single actuator and 0.770 inches maximum single actuator

• Throw Quantity

  10 1st section rear

• Switch Actuator Indexing Position Quantity

  10 single actuator

• Switch Actuator Positioning Increment

  30.0 degrees single actuator

• Contact Load Current Rating

  2.0 amperes resistive load dc at sea level

• Throw Quantity

  10 2nd section rear

• Pole Quantity

  1 1st section rear

• Operating Temp Range

  -25.0/+85.0 deg celsius

• Switch Actuator Stop Device Type

  fixed stop single actuator

• Shaft Flat/Slot Angular Location

  225.0 degrees from nonturn device single actuator

• Throw Quantity

  4 3rd section rear

• Test Data Document

  80063-smc423132 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Style Designator

  circular wafer, bushing mount

• Pole Quantity

  1 2nd section rear

• Individual Section Quantity

  3

• Overall Length

  2.398 inches minimum and 2.438 inches maximum

• Contact Switching Action

  breaks before makes each section rear

• Err Default

  err default and err default

• Contact Load Current Rating

  1.0 amperes resistive load ac at sea level

• Nominal Thread Size

  0.375 inches single mounting facility

• Flat Height

  0.213 inches minimum single actuator and 0.223 inches maximum single actuator

• Shaft Type

  round, flatted single actuator

• Overall Diameter

  1.248 inches minimum and 1.250 inches maximum

• Mounting Method

  threaded bushing single mounting facility

• Thread Class

  2a single mounting facility

• Nonturn Device Type

  tab at 3:00 o'clock

• Terminal Type

  tab, solder lug

• First Flat Length

  0.290 inches minimum single actuator and 0.330 inches maximum single actuator

• Contact Voltage Rating In Volts

  110.0 ac at sea level

• Switch Contact Basic Design

  nonpile-up symmetrical

• Thread Series Designator

  unef single mounting facility

• Shaft Diameter

  0.248 inches minimum single actuator and 0.250 inches maximum single actuator