78FTS101-4
Resistors
RESISTOR,VARIABLE,NONWIRE WOUND,PRECISION
78FTS101-4
RESISTOR,VARIABLE,NONWIRE WOUND,PRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Terminal Location
rear end
-
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-400.0/+400.0 single section
-
Shaft Bearing Type
ball
-
Function Conformity Per Section
single section absolute linearity
-
Electrical Resistance Per Section
10.0 kilohms single section
-
Effective Electrical Rotation In Deg Angular Rotation
340.0 nominal
-
Body Length
0.570 inches maximum
-
Mounting Lip Diameter
0.8750 inches nominal
-
Features Provided
nonmetallic shaft
-
Pilot Diameter
0.7500 inches maximum
-
Mounting Lip Depth
0.0620 inches nominal
-
Overall Length
1.151 inches maximum
-
Mounting Hole/Stud Circle Diameter
0.250 inches maximum
-
Undercut Diameter
0.781 inches maximum
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
150.0 single section
-
Shaft Style
round
-
Mounting Facility Quantity
3
-
Body Style
cylindrical servo mounted
-
Fixed Tap Quantity Per Section
1 single section
-
Power Dissipation Rating Per Section In Watts
0.7 free air single section
-
Screw Thread Quantity Per Inch
32.0
-
Shaft Radial Play
0.002 inches
-
Maximum Starting Torque
0.30 inch-ounces
-
Rotary Actuator Travel In Angular Deg
360.0 nominal
-
Lateral Runout
0.002 inches
-
Pilot Length
0.0620 inches nominal
-
Actuator Type
single shaft
-
Reliability Indicator
not established
-
Shaft Length
0.410 inches nominal
-
Screw Thread Series Designator
unc
-
Screw Thread Diameter
0.138 inches nominal
-
Actuator Travel Control Feature
continuous motion
-
Shaft Diameter
0.1249 inches nominal
-
Angle Of Mounting Hole In Deg
90.0
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
85.0 single section
-
Maximum Running Torque
0.30 inch-ounces
-
Tap Location From Ccw Terminal Per Section In Ohms
5000.0 single section
-
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section
-
Shaft End Play
0.003 inches
-
Mounting Method
threaded hole
-
Shaft Runout
0.001 inches
-
Function Conformity Tolerance Per Section
-0.15/+0.15 single section
-
Overall Diameter
0.875 inches nominal
-
Tap Location Tolerance Per Section
-1.0/+1.0 ohms single section
-
Function Characteristic Per Section
single section linear
-
Body Diameter
0.875 inches nominal
-
Terminal Type And Quantity
4 turret
-
Pilot Diameter Runout
0.0045 inches
-
Undercut Width
0.0570 inches minimum
-
Angle Between Centerlines Of Mounting Holes In Deg
120.0
-
Section Quantity
1