444-0099-007

Technical Characteristics

• Section Quantity

  1

• Mounting Hole Diameter

  0.088 inches minimum and 0.098 inches maximum

• Body Width

  0.180 inches minimum and 0.200 inches maximum

• Shaft Style

  3c round, slotted

• Actuator Type

  single shaft

• Center To Center Distance Between Terminals

  0.890 inches minimum and 0.910 inches maximum

• Mounting Facility Quantity

  2

• Terminal Location

  lower adjacent side single row

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.690 inches minimum and 0.710 inches maximum

• Power Dissipation Rating Per Section In Watts

  1.0 free air single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Standard Taper Curve Per Section

  a single section

• Terminal Type And Quantity

  3 pin

• Body Style

  26b rectangular w/mounting holes/slots

• Reliability Indicator

  not established

• Terminal Length

  0.480 inches minimum and 0.520 inches maximum

• Shaft Diameter

  0.100 inches minimum and 0.130 inches maximum

• Shaft Length

  0.060 inches minimum and 0.080 inches maximum

• Body Length

  1.240 inches minimum and 1.260 inches maximum

• Body Height

  0.300 inches minimum and 0.330 inches maximum

• Lateral Distance Between Mounting Hole Centers

  0.995 inches minimum and 1.005 inches maximum

• Mounting Method

  unthreaded hole

• Iii Cubic Measure

  0.083 cubic inches

• Electrical Resistance Per Section

  100.0 ohms single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  175.0 single section

• Resistance Tolerance Per Section In Percent

  -5.0 to 5.0 single section

• Test Data Document

  94756-444-0099 drawing