MD09-10/10/2516

Technical Characteristics

• Body Length

  2.340 inches maximum

• Electrical Resistance Per Section

  2.5 percent, rated amperes c and better industrial clears

• Electrical Resistance Per Section

  10.0 percent, rated amperes c and better finish

• Undercut Width

  0.0570 inches minimum

• Shaft Runout

  0.002 inches

• Mounting Lip Depth

  0.0620 inches nominal

• Shaft Bearing Type

  sleeve

• Undercut Diameter

  0.781 inches maximum

• Maximum Running Torque

  0.75 inch-ounces

• Shaft Style

  round

• Body Diameter

  0.922 inches nominal

• Shaft Radial Play

  0.001 inches

• Body Style

  cylindrical servo mounted

• Rotary Actuator Travel In Angular Deg

  3600.0 nominal

• Shaft Length

  0.625 inches nominal

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 1st section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 all sections

• Pilot Diameter

  0.6520 inches nominal

• Shaft Diameter

  0.125 inches nominal

• Function Conformity Per Section

  all sections independent linearity

• Pilot Diameter Runout

  0.002 inches

• Pilot Length

  0.0620 inches nominal

• Actuator Type

  single shaft

• Function Conformity Tolerance Per Section

  -0.50/+0.50 all sections

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 nominal

• Reliability Indicator

  not established

• Maximum Starting Torque

  1.25 inch-ounces

• Actuator Travel Control Feature

  continuous motion

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 all sections

• Lateral Runout

  0.004 inches

• Mounting Method

  clamp ring

• Terminal Location

  radially positioned over less than half the circumference

• Terminal Type And Quantity

  6 turret

• Shaft End Play

  0.005 inches

• Section Quantity

  2

• Power Dissipation Rating Per Section In Watts

  3.0 free air all sections

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 all sections

• Function Characteristic Per Section

  all sections linear

• Mounting Lip Diameter

  0.8750 inches nominal

• Resistance Tolerance Per Section In Percent

  -1.0/+1.0 2nd section