749-6172

Technical Characteristics

• Overall Length

  1.866 inches nominal

• Pilot Length

  0.1270 inches minimum and 0.1370 inches maximum

• Power Dissipation Rating Per Section In Watts

  2.0 free air single section

• Pilot Diameter

  1.3115 inches minimum and 1.3120 inches maximum

• Shaft Bearing Type

  ball

• Mounting Lip Diameter

  1.4320 inches minimum and 1.4420 inches maximum

• Electrical Resistance Per Section

  10.0 kilohms single section

• Function Conformity Per Section

  single section independent linearity

• Mechanical Backlash In Deg Angular Rotation

  0.041

• Maximum Starting Torque

  0.70 inch-ounces

• Effective Electrical Rotation In Deg Angular Rotation

  350.0 nominal

• Pilot Diameter Runout

  0.001 inches

• Shaft Style

  round

• Overall Diameter

  1.709 inches maximum

• Undercut Width

  0.0730 inches minimum

• Function Conformity Tolerance Per Section

  -0.05/+0.05 single section

• Body Style

  cylindrical servo mounted

• Fixed Tap Quantity Per Section

  1 single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Shaft Length

  0.734 inches minimum and 0.766 inches maximum

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Shaft Diameter

  0.120 inches nominal

• Lateral Runout

  0.002 inches

• Body Length

  1.100 inches maximum

• Body Diameter

  1.453 inches maximum

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Undercut Diameter

  1.315 inches maximum

• Actuator Travel Control Feature

  continuous motion

• Mounting Method

  clamp ring

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  228.0 single section and 219.0 single section

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Shaft Runout

  0.001 inches

• Terminal Type And Quantity

  8 turret

• Function Characteristic Per Section

  single section linear

• Section Quantity

  1

• Terminal Location

  radially positioned over more than half the circumference

• Mounting Lip Depth

  0.0880 inches minimum and 0.0980 inches maximum

• Test Data Document

  03538-7648736 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)