FHL30G-3

Technical Characteristics

• Mounting Hole Style

  bushing mounting w/2 holes and keyway

• Contact Material

  any acceptable

• Screw Thread Diameter

  0.164 inches nominal

• Center To Center Distance Between Keyway And Bushing Hole

  0.432 inches minimum and 0.442 inches maximum

• Accommodated Fuse Length

  1.250 inches nominal

• Center To Center Distance Between Outside Mounting Holes Along Width

  0.870 inches minimum and 0.880 inches maximum

• Screw Thread Quantity Per Inch

  32.0

• Terminal Type And Quantity

  2 threaded stud

• Voltage In Volts

  45.0

• Center To Center Distance Between Outside Mounting Holes Along Length

  0.745 inches minimum and 0.755 inches maximum

• Environmental Protection

  dripproof

• Interruption Indicator Method

  incandescent lamp

• Overall Height

  1.200 inches minimum and 1.205 inches maximum

• Fuse Terminal Type Accommodated

  ferrule

• Contact Surface Treatment

  any acceptable

• Mounting Hole Diameter

  0.151 inches minimum and 0.161 inches maximum

• Indicating Lamp Voltage Range In Volts

  +34.0/+45.0

• Lens Color

  amber

• ~1

  data on certain environmental and performanc

• Resistor Rating

  680.0 ohms

• Specification/Standard Data

  81349-mil-f-19207/19 government specification

• Fuse Accommodation Quantity

  1

• Keyway Width

  0.203 inches nominal

• Test Data Document

  81349-mil-f-19207 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type

• Length From Front Protrusion To Mounting Surface

  0.798 inches minimum and 0.828 inches maximum

• Current Carrying Rating In Amps

  30.0

• Mounting Hole Quantity

  2

• Body Style

  rear panel mounted type

• Overall Length

  3.750 inches minimum and 4.000 inches maximum

• Overall Width

  1.068 inches minimum and 1.072 inches maximum

• Bushing Hole Diameter

  0.870 inches minimum and 0.880 inches maximum

• Accommodated Ferrule Diameter

  0.250 inches nominal