577R900H06
Resistors
RESISTOR,VARIABLE,NONWIRE WOUND,PRECISION
577R900H06
RESISTOR,VARIABLE,NONWIRE WOUND,PRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Actuator Travel Control Feature
stops
-
Fragility Factor
moderately rugged
-
Terminal Type And Quantity
3 turret
-
Shaft End Play
0.005 inches
-
Power Dissipation Rating Per Section In Watts
1.0 7th secondary at 10'30 oclock
-
Function Conformity Per Section
single section independent linearity
-
Shaft Bearing Type
bearing
-
Body Length
1.880 inches maximum
-
Shaft Length
0.406 inches minimum and 0.468 inches maximum
-
Cubic Measure
1.403 cubic inches
-
Pilot Diameter Runout
0.001 inches
-
Electrical Resistance Per Section
20.0 percent, rated amperes c and better flooring
-
Body Diameter
1.062 nominal inches
-
Rotary Actuator Travel In Angular Deg
320.0 nominal
-
Shaft Radial Play
0.001 inches
-
Body Style
cylindrical servo mounted
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
125.0 all sections
-
Shaft Diameter
0.1242 inches minimum and 0.1247 inches maximum
-
Flat Height
0.104 inches minimum and 0.106 inches maximum
-
Lateral Runout
0.002 inches
-
Actuator Type
single shaft
-
Reliability Indicator
not established
-
Maximum Starting Torque
0.35 inch-ounces
-
Shaft Style
round, flatted
-
Mounting Method
clamp ring
-
Maximum Running Torque
0.35 inch-ounces
-
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section
-
Mounting Lip Depth
0.0570 nominal mils and 0.0670 nominal centimeters
-
Function Conformity Tolerance Per Section
-0.25/+0.25 single section
-
Pilot Diameter
0.9683 inches minimum and 0.9688 inches maximum
-
First Flat Length
0.377 inches nominal
-
Features Provided
humidity proof
-
Pilot Length
0.0570 inches minimum and 0.0670 inches maximum
-
Effective Electrical Rotation In Deg Angular Rotation
320.0 nominal
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
70.0 all sections
-
Undercut Width
0.0570 inches minimum
-
Function Characteristic Per Section
7 oclock primary input
-
Section Quantity
1
-
Terminal Location
radially positioned over more than half the circumference
-
Undercut Diameter
0.9683 inches minimum and 0.9690 inches maximum
-
Shaft Runout
0.002 inches
-
Test Data Document
97942-577r900 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
-
Mounting Lip Diameter
1.0570 inches minimum and 1.0670 inches maximum