900451-5

Technical Characteristics

• Mounting Method

  clamp ring

• Terminal Location

  radially positioned over less than half the circumference

• Effective Electrical Rotation In Deg Angular Rotation

  360.0 nominal

• Shaft Diameter

  0.1195 inches minimum and 0.120 inches maximum

• Shaft Style

  round, slotted

• Function Characteristic Per Section

  all sections linear

• Section Quantity

  3

• Shaft Bearing Type

  bearing

• Maximum Starting Torque

  2.00 inch-ounces

• Undercut Diameter

  0.970 inches minimum and 0.980 inches maximum

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 all sections

• Body Diameter

  1.156 inches maximum

• Shaft Radial Play

  0.0006 inches

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Electrical Resistance Per Section

  20.0 percent, rated amperes c and better finish

• Body Length

  1.700 inches maximum

• Pilot Diameter Runout

  0.001 inches

• Electrical Resistance Per Section

  4.0 percent, rated amperes c and better industrial clears

• Fixed Tap Quantity Per Section

  1 all sections

• Function Conformity Tolerance Per Section

  -0.20/+0.20 all sections

• Body Style

  cylindrical servo mounted

• Lateral Runout

  0.001 inches

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -300.0/+300.0 all sections

• Overall Length

  2.138 inches nominal

• Electrical Resistance Per Section

  4.0 percent, rated amperes c and better select

• Overall Diameter

  1.156 inches maximum

• Tap Location From Ccw Terminal Per Section In Ohms

  400.0 all sections

• Pilot Length

  0.0620 inches maximum

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Function Conformity Per Section

  all sections independent linearity

• Tap Location Tolerance Per Section

  -1.0/+1.0 deg angular rotation all sections

• Actuator Type

  single shaft

• Mounting Lip Depth

  0.0600 inches nominal

• Shaft End Play

  0.002 inches

• Reliability Indicator

  not established

• Actuator Travel Control Feature

  continuous motion

• Shaft Runout

  0.001 inches

• Pilot Diameter

  0.9683 inches minimum and 0.9688 inches maximum

• Undercut Width

  0.0600 inches nominal

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  25.0 all sections

• Terminal Type And Quantity

  12 solder stud

• Power Dissipation Rating Per Section In Watts

  1.0 free air all sections

• Shaft Length

  0.500 inches nominal

• Mounting Lip Diameter

  1.0570 inches minimum and 1.0670 inches maximum