1193-2

Technical Characteristics

• Power Dissipation Rating Per Section In Watts

  1.0 free air single section

• Terminal Type And Quantity

  3 turret

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Maximum Starting Torque

  0.10 inch-ounces

• Function Conformity Per Section

  single section independent linearity

• Mounting Lip Diameter

  0.8750 inches nominal

• Features Provided

  nonmetallic shaft

• Mounting Lip Depth

  0.0620 inches nominal

• Electrical Resistance Per Section

  2.0 kilohms single section

• Effective Electrical Rotation In Deg Angular Rotation

  350.0 nominal

• Shaft Style

  round

• Maximum Running Torque

  0.10 inch-ounces

• Shaft Diameter

  0.1245 inches minimum and 0.1248 inches maximum

• Body Style

  cylindrical servo mounted

• Body Diameter

  0.880 inches nominal

• Pilot Diameter Runout

  0.0015 inches

• Resistance Tolerance Per Section In Percent

  -3.0/+3.0 single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Shaft Radial Play

  0.002 inches

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Lateral Runout

  0.002 inches

• Pilot Length

  0.0620 inches nominal

• Special Features

  three no.8-80 nf screws to be supplied,228 additional length,pot shall remain assembled when screws are removed

• Undercut Width

  0.0620 inches nominal

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Function Conformity Tolerance Per Section

  -0.50/+0.50 single section

• Actuator Travel Control Feature

  continuous motion

• Angle Of Mounting Hole In Deg

  90.0

• Pilot Diameter

  0.7000 inches nominal

• Mounting Method

  clamp ring

• Terminal Location

  radially positioned over less than half the circumference

• Shaft End Play

  0.003 inches

• Shaft Runout

  0.001 inches

• Function Characteristic Per Section

  single section linear

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Shaft Length

  0.500 inches nominal

• Undercut Diameter

  0.750 inches nominal

• Mounting Hole/Stud Circle Diameter

  0.780 inches nominal

• Section Quantity

  1

• Body Length

  0.606 inches nominal

• Angle Between Centerlines Of Mounting Holes In Deg

  135.0