200FTS102

Technical Characteristics

• Electrical Resistance Per Section

  28.0 percent, rated amperes c and better industrial clears

• Shaft Bearing Type

  ball

• Section Quantity

  3

• Function Characteristic Per Section

  all sections table

• Body Length

  2.500 inches maximum

• Undercut Diameter

  1.880 inches nominal

• Maximum Starting Torque

  2.00 inch-ounces

• Mounting Lip Diameter

  2.0000 inches nominal

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Pilot Diameter Runout

  0.001 inches

• Shaft Style

  round

• Mounting Lip Depth

  0.0930 inches nominal

• Function Conformity Per Section

  all sections absolute conformity

• Shaft Radial Play

  0.0008 inches

• Shaft End Play

  0.001 inches

• Body Style

  cylindrical servo mounted

• Lateral Runout

  0.001 inches

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 all sections

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 all sections

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -100.0/+100.0 all sections

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Pilot Length

  0.0620 inches nominal

• Actuator Type

  single shaft

• Function Conformity Tolerance Per Section

  -0.50/+0.50 all sections

• Pilot Diameter

  1.0000 inches maximum

• Reliability Indicator

  not established

• Effective Electrical Rotation In Deg Angular Rotation

  347.0 nominal

• Actuator Travel Control Feature

  continuous motion

• Terminal Type And Quantity

  9 turret

• Test Data Document

  70210-537161 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Power Dissipation Rating Per Section In Watts

  1.0 free air all sections

• Electrical Resistance Per Section

  10.0 percent, rated amperes c and better finish

• Electrical Resistance Per Section

  10.0 percent, rated amperes c and better select

• Undercut Width

  0.0570 inches minimum

• Shaft Runout

  0.002 inches

• Body Diameter

  2.020 inches nominal

• Shaft Diameter

  0.2498 inches maximum

• Shaft Length

  0.450 inches nominal

• Terminal Location

  radially positioned over less than half the circumference

• Mounting Method

  clamp ring