5611-1347-1

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Shaft End Play

  0.005 inches

• Nonturn Device Radius

  0.531 inches nominal

• Body Style

  cylindrical bushing mounted

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Power Dissipation Rating Per Section In Watts

  3.5 free air single section

• Electrical Resistance Per Section

  10.0 kilohms single section

• Function Conformity Per Section

  single section independent linearity

• Features Provided

  nonmetallic shaft

• Shaft Bearing Type

  sleeve

• Screw Thread Diameter

  0.375 inches nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  85.0 single section

• Body Length

  0.885 inches minimum and 0.925 inches maximum

• Shaft Length

  1.000 inches nominal

• Shaft Style

  round

• Mounting Bushing Length

  0.375 inches nominal

• Resistance Tolerance Per Section In Percent

  -1.0/+1.0 single section

• Fixed Tap Quantity Per Section

  1 single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Shaft Runout

  0.00005 inches

• Pilot Diameter Runout

  0.002 inches

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Screw Thread Series Designator

  unef

• Maximum Running Torque

  1.10 inch-ounces

• Function Conformity Tolerance Per Section

  -0.50/+0.50 single section

• Lateral Runout

  0.004 inches

• Mounting Method

  standard bushing

• Terminal Type And Quantity

  4 tab, solder lug

• Tap Location From Ccw Terminal Per Section In Ohms

  5000.0 single section

• Rotary Actuator Travel In Angular Deg

  348.0 nominal

• Shaft Radial Play

  0.004 inches

• Nonturn Device Location

  at 6 oclock

• Tap Location Tolerance Per Section

  -1.0/+1.0 ohms single section

• Function Characteristic Per Section

  single section linear

• Effective Electrical Rotation In Deg Angular Rotation

  348.0 nominal

• Maximum Starting Torque

  1.50 inch-ounces

• Body Diameter

  1.995 inches minimum and 2.005 inches maximum

• Shaft Diameter

  0.2494 inches minimum and 0.2497 inches maximum

• Test Data Document

  10001-2615198 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Section Quantity

  1

• Terminal Location

  radially positioned over more than half the circumference

• Screw Thread Quantity Per Inch

  32.0