259-1379-000

Technical Characteristics

• Pole Quantity

  4 each section rear

• Contact Voltage Rating In Volts

  110.0 ac at sea level

• Switch Contact Basic Design

  nonpile-up symmetrical

• Thread Series Designator

  unef single mounting facility

• Switch Actuator Indexing Position Quantity

  2 single actuator

• Contact Voltage Rating In Volts

  28.0 dc at sea level

• Shaft Length

  0.796 inches minimum single actuator and 0.828 inches maximum single actuator

• Switch Actuator Positioning Increment

  30.0 degrees single actuator

• Contact Load Current Rating

  2.0 amperes resistive load dc at sea level

• First Flat Length

  0.359 inches minimum single actuator and 0.391 inches maximum single actuator

• Throw Quantity

  2 each section rear

• Flat Height

  0.215 inches minimum single actuator and 0.221 inches maximum single actuator

• Individual Section Quantity

  2

• Switch Actuator Stop Device Type

  fixed stop single actuator

• Operating Temp Range

  -55.0/+85.0 deg celsius

• Detent Rotational Torque Range

  +20.000/+50.000 inch-ounces single actuator

• Style Designator

  circular wafer, bushing mount

• Contact Switching Action

  breaks before makes each section rear

• Err Default

  err default and err default

• Overall Length

  1.786 inches minimum and 1.838 inches maximum

• Shaft Flat/Slot Angular Location

  60.0 degrees from nonturn device single actuator

• Contact Load Current Rating

  1.0 amperes resistive load ac at sea level

• Nominal Thread Size

  0.375 inches single mounting facility

• Shaft Type

  round, flatted single actuator

• Test Data Document

  13499-259-1379-00 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Mounting Method

  threaded bushing single mounting facility

• Nonturn Device Radius

  0.359 inches minimum at 3:00 o'clock and 0.391 inches maximum at 3:00 o'clock

• Thread Class

  2a single mounting facility

• Nonturn Device Type

  tab at 3:00 o'clock

• Overall Width

  0.922 inches minimum and 0.954 inches maximum

• Overall Height

  0.980 inches minimum and 1.000 inches maximum

• Terminal Type

  tab, solder lug

• Shaft Diameter

  0.240 inches minimum single actuator and 0.260 inches maximum single actuator