RRL16B501

Technical Characteristics

• Section Quantity

  1

• Pilot Diameter

  1.93600 inches minimum and 1.93700 inches maximum

• Body Diameter

  1.990 inches minimum and 2.010 inches maximum

• Shaft Diameter

  0.250 inches maximum

• Shaft Length

  0.198 inches minimum and 0.218 inches maximum

• Body Length

  0.990 inches minimum and 1.010 inches maximum

• Shaft Bearing Type

  bearing

• Shaft End Play

  0.00600 inches

• Pilot Diameter Runout

  0.00100 inches

• Terminal Location

  radially positioned over less than half the circumference

• Electrical Resistance Per Section

  500.000 ohms single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  105.0 single section

• Power Dissipation Rating Per Section In Watts

  4.0 free air single section

• Actuator Travel Control Feature

  continuous motion

• Function Characteristic Per Section

  single section linear

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Pilot Length

  0.02900 inches minimum and 0.03200 inches maximum

• Overall Length

  1.217 inches minimum and 1.260 inches maximum

• Undercut Diameter

  1.9375 inches minimum and 1.9385 inches maximum

• Undercut Width

  0.07000 inches minimum and 0.09000 inches maximum

• Overall Diameter

  2.125 inches minimum and 2.151 inches maximum

• Mounting Lip Diameter

  1.99000 inches minimum and 2.01000 inches maximum

• Mounting Lip Depth

  0.06800 inches minimum and 0.08500 inches maximum

• Actuator Type

  single shaft

• Effective Electrical Rotation In Deg Angular Rotation

  319.0 minimum and 321.0 maximum

• Maximum Starting Torque

  0.60 inch-ounces (ounce-inches)

• Lateral Runout

  0.001 inches

• Mounting Method

  clamp ring

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Function Conformity Tolerance Per Section

  m0.50/p0.50 single section

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  m30.0/p30.0 single section

• Function Conformity Per Section

  single section independent linearity

• Resistance Tolerance Per Section In Percent

  m1.0/p1.0 single section

• Terminal Type And Quantity

  14 solder stud