526-9588-010

Technical Characteristics

• Operating Temp Range

  -30.0/+80.0 deg celsius

• Mounting Facility Type And Quantity

  2 unthreaded hole

• Overall Height

  2.475 inches maximum

• Distance Between Mounting Surface And Lower End

  0.600 inches nominal

• Functional Terminal Type And Quantity

  2 tab, solder lug input 1st function

• Overall Length

  1.126 inches nominal

• Input Impedance Per Function W/Load

  1.0 kilohms blank

• Overall Width

  0.672 inches nominal

• Insertion Loss At Reference Frequency Per Function In Decibels

  8.0 blank

• Functional Terminal Type And Quantity

  1 tab, solder lug ground 3rd function

• Inclosure Type

  hermetically sealed

• Specified Frequencies Of Discrimination Per Function

  500.35 kilohertz blank and 499.65 kilohertz blank and 493.20 kilohertz blank and 506.80 kilohertz blank

• Functional Terminal Type And Quantity

  2 tab, solder lug output 2nd function

• Output Impedance Per Function W/Source Across Input

  330.0 ohms blank

• Frequency Band Width Per Function

  499.65 kilohertz blank and 500.35 kilohertz blank

• Style Designator

  round terminal/terminals on opposite surfaces

• Principal Circuitry Type Per Function

  inductance-capacitance-resistance blank

• Discrimination At Specified Frequencies Per Function In Decibels

  3.0 nominal blank and 60.0 minimum blank and 3.0 nominal blank and 60.0 minimum blank

• Body Outside Diameter

  0.438 inches nominal

• Unthreaded Mounting Hole Diameter

  0.128 inches nominal

• Reference Frequency Per Function

  500.0 kilohertz blank

• Body Surface Treatment

  tin

• Body Height

  1.750 inches maximum

• Body Material

  metal

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

  0.750 inches nominal

• Test Data Document

  58189-810002-235 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)