719123-1

Technical Characteristics

• Power Dissipation Rating Per Section In Watts

  1.0 free air single section

• Body Style

  rectangular w/mounting holes

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.090 inches minimum and 0.110 inches maximum

• Shaft Style

  round, slotted

• Mounting Slot Width

  0.074 inches minimum

• Maximum Starting Torque

  5.00 inch-ounces

• Mounting Hole Diameter

  0.074 inches minimum

• Terminal Location

  left adjacent side from adjustment control

• Lateral Distance Between Mounting Hole Centers

  0.414 inches minimum and 0.424 inches maximum

• Rotary Actuator Travel In Angular Deg

  9000.0 nominal

• Shaft Diameter

  0.030 inches minimum and 0.050 inches maximum

• Body Height

  0.360 inches minimum and 0.390 inches maximum

• Electrical Resistance Per Section

  200.000 ohms single section

• Mounting Facility Quantity

  3

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Terminal Length

  0.285 inches minimum and 0.315 inches maximum

• Actuator Travel Control Feature

  clutch

• Shaft Length

  0.055 inches minimum and 0.065 inches maximum

• Actuator Type

  single shaft

• Center To Center Distance Between Terminals

  0.190 inches minimum and 0.210 inches maximum

• Body Width

  0.145 inches minimum and 0.155 inches maximum

• Standard Taper Curve Per Section

  a single section

• Overall Length

  0.390 inches minimum and 0.440 inches maximum

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -50.0/+50.0 single section

• Terminal Type And Quantity

  3 pin

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  175.0 single section

• Center To Center Distance Between Terminal Rows

  0.100 inches nominal

• Overall Width

  0.430 inches minimum and 0.470 inches maximum

• Mounting Method

  2 slots and one unthreaded hole in center

• Test Data Document

  08241-gvl20404 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Overall Height

  0.360 inches minimum and 0.390 inches maximum

• Body Length

  0.360 inches minimum and 0.390 inches maximum

• Effective Electrical Rotation In Deg Angular Rotation

  9000.0 nominal

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Section Quantity

  1