GVL20404-1
Resistors
RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION
GVL20404-1
RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Power Dissipation Rating Per Section In Watts
1.0 free air single section
-
Body Style
rectangular w/mounting holes
-
Center To Center Distance Between Center Terminal And Outside Terminal
0.090 inches minimum and 0.110 inches maximum
-
Shaft Style
round, slotted
-
Mounting Slot Width
0.074 inches minimum
-
Maximum Starting Torque
5.00 inch-ounces
-
Mounting Hole Diameter
0.074 inches minimum
-
Terminal Location
left adjacent side from adjustment control
-
Lateral Distance Between Mounting Hole Centers
0.414 inches minimum and 0.424 inches maximum
-
Rotary Actuator Travel In Angular Deg
9000.0 nominal
-
Shaft Diameter
0.030 inches minimum and 0.050 inches maximum
-
Body Height
0.360 inches minimum and 0.390 inches maximum
-
Electrical Resistance Per Section
200.000 ohms single section
-
Mounting Facility Quantity
3
-
Resistance Tolerance Per Section In Percent
-5.0/+5.0 single section
-
Terminal Length
0.285 inches minimum and 0.315 inches maximum
-
Actuator Travel Control Feature
clutch
-
Shaft Length
0.055 inches minimum and 0.065 inches maximum
-
Actuator Type
single shaft
-
Center To Center Distance Between Terminals
0.190 inches minimum and 0.210 inches maximum
-
Body Width
0.145 inches minimum and 0.155 inches maximum
-
Standard Taper Curve Per Section
a single section
-
Overall Length
0.390 inches minimum and 0.440 inches maximum
-
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-50.0/+50.0 single section
-
Terminal Type And Quantity
3 pin
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
175.0 single section
-
Center To Center Distance Between Terminal Rows
0.100 inches nominal
-
Overall Width
0.430 inches minimum and 0.470 inches maximum
-
Mounting Method
2 slots and one unthreaded hole in center
-
Test Data Document
08241-gvl20404 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
-
Overall Height
0.360 inches minimum and 0.390 inches maximum
-
Body Length
0.360 inches minimum and 0.390 inches maximum
-
Effective Electrical Rotation In Deg Angular Rotation
9000.0 nominal
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
70.0 single section
-
Section Quantity
1