RC15-01-4402

Technical Characteristics

• Undercut Width

  0.0680 inches minimum and 0.0780 inches maximum

• Mounting Lip Depth

  0.0880 inches minimum and 0.0980 inches maximum

• Overall Length

  1.897 inches maximum

• Section Quantity

  1

• Body Diameter

  1.432 inches minimum and 1.442 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Overall Diameter

  1.689 inches maximum

• Function Conformity Tolerance Per Section

  -1.00/+1.00 single section

• Function Characteristic Per Section

  single section linear

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Effective Electrical Rotation In Deg Angular Rotation

  325.0 minimum and 335.0 maximum

• Terminal Location

  radially positioned over less than half the circumference

• Mounting Method

  clamp ring

• Terminal Type And Quantity

  4 tab, solder lug

• Test Data Document

  19204-8437121 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Shaft Length

  1.000 inches nominal

• Function Conformity Per Section

  single section independent linearity

• Mounting Lip Diameter

  1.4320 inches minimum and 1.4420 inches maximum

• Tap Location Tolerance Per Section

  -2.0/+2.0 deg angular rotation single section

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  165.0 single section

• Power Dissipation Rating Per Section In Watts

  2.0 free air single section

• Undercut Diameter

  1.302 inches minimum and 1.312 inches maximum

• Pilot Diameter

  1.3120 inches minimum and 1.3125 inches maximum

• Actuator Travel Control Feature

  continuous motion

• Reliability Indicator

  not established

• Actuator Type

  single shaft

• Electrical Resistance Per Section

  12.0 kilohms single section

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Shaft Diameter

  0.125 inches nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Body Length

  0.867 inches maximum

• Fixed Tap Quantity Per Section

  1 single section

• Body Style

  cylindrical servo mounted

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Shaft Style

  round