444-0395-037

Technical Characteristics

• Terminal Length

  0.468 inches minimum and 0.531 inches maximum

• Overall Height

  0.796 inches minimum and 0.891 inches maximum

• Mounting Hole Diameter

  0.088 inches minimum and 0.098 inches maximum

• Shaft Length

  0.040 inches minimum and 0.060 inches maximum

• Body Length

  1.234 inches minimum and 1.266 inches maximum

• Body Height

  0.328 inches minimum and 0.360 inches maximum

• Actuator Type

  single shaft

• Shaft End Play

  0.0002 inches

• Lateral Distance Between Mounting Hole Centers

  1.000 inches nominal

• Mounting Facility Quantity

  2

• Terminal Location

  lower adjacent side single row

• Mounting Method

  unthreaded hole

• Rotary Actuator Travel In Angular Deg

  9720.0 nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  175.0 single section

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  m100.0/p100.0 single section

• Actuator Travel Control Feature

  clutch

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• Standard Taper Curve Per Section

  a single section

• Terminal Type And Quantity

  3 pin

• Section Quantity

  1

• Reliability Indicator

  not established

• Overall Length

  1.274 inches minimum and 1.326 inches maximum

• Overall Width

  0.283 inches minimum and 0.303 inches maximum

• Shaft Diameter

  0.109 inches minimum and 0.141 inches maximum

• Body Width

  0.283 inches minimum and 0.303 inches maximum

• Effective Electrical Rotation In Deg Angular Rotation

  8280.0 minimum and 9000.0 maximum

• Maximum Starting Torque

  8.00 inch-ounces (ounce-inches)

• Center To Center Distance Between Terminals

  0.690 inches minimum and 0.710 inches maximum

• Electrical Resistance Per Section

  5.0 kilohms single section

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.262 inches minimum and 0.282 inches maximum

• Power Dissipation Rating Per Section In Watts

  1.0 free air single section

• Resistance Tolerance Per Section In Percent

  m10.0/p10.0 single section