22027-4

Technical Characteristics

• Contact Arm Electrical Off Position

  fully ccw-cw

• Section Quantity

  2

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  55.0 all sections

• Effective Electrical Rotation In Deg Angular Rotation

  165.0 minimum and 175.0 maximum

• Fixed Tap Quantity Per Section

  1 1st section

• Undercut Width

  0.0780 inches nominal

• Shaft Diameter

  0.125 inches nominal

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Pilot Length

  0.0620 inches nominal

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Mounting Lip Diameter

  1.7670 inches maximum

• Actuator Travel Control Feature

  continuous motion

• Standard Taper Curve Per Section

  a all sections

• Mounting Method

  clamp ring

• Tap Location Tolerance Per Section

  -1.0/+1.0 ohms 1st section

• Terminal Location

  radially positioned over less than half the circumference

• Pilot Diameter

  1.5620 inches maximum

• Undercut Diameter

  1.750 inches maximum

• Overall Length

  2.230 inches maximum

• Body Diameter

  1.767 inches maximum

• Body Length

  0.977 inches maximum

• Features Provided

  nonmetallic shaft

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  85.0 all sections

• Electrical Resistance Per Section

  4.25 percent, rated amperes c and better industrial clears

• Tap Location From Ccw Terminal Per Section In Ohms

  4250.0 1st section

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Shaft Style

  round

• Mounting Lip Depth

  0.0930 inches nominal

• Overall Diameter

  2.120 inches maximum

• Electrical Resistance Per Section

  8.5 percent, rated amperes c and better finish

• Body Style

  cylindrical servo mounted

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -300.0/+300.0 all sections

• Shaft Length

  0.562 inches nominal

• Terminal Type And Quantity

  7 tab, solder lug

• Test Data Document

  80020-41297 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Power Dissipation Rating Per Section In Watts

  4.0 free air all sections