SA5929
Resistors
RESISTOR,VARIABLE,WIRE WOUND,PRECISION
SA5929
RESISTOR,VARIABLE,WIRE WOUND,PRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Section Quantity
2
-
Reliability Indicator
not established
-
Shaft Length
0.796 inches minimum and 0.828 inches maximum
-
Mounting Bushing Length
0.296 inches minimum and 0.328 inches maximum
-
Body Length
4.087 inches minimum and 4.175 inches maximum
-
Body Height
1.796 inches minimum and 1.828 inches maximum
-
Effective Electrical Rotation In Deg Angular Rotation
3600.0 nominal
-
Maximum Running Torque
8.00 inch-ounces (ounce-inches)
-
Nonturn Device Location
at 12 oclock
-
Nonturn Device Radius
0.546 inches minimum and 0.578 inches maximum
-
Shaft Runout
0.0005 inches
-
Fragility Factor
moderately rugged
-
Screw Thread Series Designator
unef
-
Terminal Location
longitudinally positioned on the circumference
-
Function Conformity Tolerance Per Section
m0.25/p0.25 all sections
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
85.0 all sections
-
Power Dissipation Rating Per Section In Watts
5.0 free air all sections
-
Function Conformity Per Section
all sections independent linearity
-
Tap Location Tolerance Per Section
m0.025/p0.025 ohms all sections
-
Resistance Tolerance Per Section In Percent
m1.0/p1.0 all sections
-
Tap Location From Ccw Terminal Per Section In Ohms
2.5 all sections
-
Function Characteristic Per Section
all sections linear
-
Terminal Type And Quantity
8 tab,solder lug
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
40.0 all sections
-
Actuator Travel Control Feature
clutch
-
Fixed Tap Quantity Per Section
1 all sections
-
Rotary Actuator Travel In Angular Deg
3600.0 nominal
-
Electrical Resistance Per Section
5.0 ohms all sections
-
Mounting Method
standard bushing
-
Screw Thread Quantity Per Inch
32.0
-
Screw Thread Diameter
0.375 inches nominal
-
Shaft Radial Play
0.003 inches
-
Pilot Diameter Runout
0.002 inches
-
Lateral Runout
0.003 inches
-
Shaft End Play
0.005 inches
-
Maximum Stop Torque
550.00 inch-ounces (ounce-inches)
-
Maximum Starting Torque
8.00 inch-ounces (ounce-inches)
-
Actuator Type
double ended shaft
-
Shaft Bearing Type
sleeve
-
Body Width
1.796 inches minimum and 1.828 inches maximum
-
Shaft Diameter
0.2494 inches minimum and 0.2497 inches maximum