1190-9510

Technical Characteristics

• Body Length

  0.800 inches nominal

• Maximum Running Torque

  0.60 inch-ounces

• Mounting Lip Diameter

  1.62500 inches nominal

• Shaft End Play

  0.00500 inches

• Shaft Bearing Type

  ball

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Power Dissipation Rating Per Section In Watts

  3.5 free air single section

• Maximum Stop Torque

  0.95 inch-ounces

• Function Conformity Per Section

  single section independent linearity

• Body Diameter

  1.625 inches nominal

• Pilot Diameter

  1.46750 inches minimum and 1.46800 inches maximum

• Overall Diameter

  2.000 inches nominal

• Effective Electrical Rotation In Deg Angular Rotation

  345.0 nominal

• Function Conformity Tolerance Per Section

  -0.30/+0.30 single section

• Electrical Resistance Per Section

  10.000 kilohms single section

• Shaft Style

  round

• Mounting Lip Depth

  0.06200 inches nominal

• Test Data Document

  02111-1190-9510 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Body Style

  cylindrical servo mounted

• Shaft Length

  0.562 inches nominal

• Resistance Tolerance Per Section In Percent

  -3.0/+3.0 single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Shaft Radial Play

  0.002 inches

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Lateral Runout

  0.002 inches

• Actuator Type

  single shaft

• Overall Length

  1.362 inches nominal

• Pilot Diameter Runout

  0.00200 inches

• Pilot Length

  0.06200 inches nominal

• Actuator Travel Control Feature

  continuous motion

• Mounting Method

  clamp ring

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  105.0 single section

• Function Characteristic Per Section

  single section linear

• Undercut Width

  0.07300 inches nominal

• Terminal Type And Quantity

  4 turret

• Shaft Diameter

  0.2494 inches minimum and 0.2497 inches maximum

• Section Quantity

  1

• Terminal Location

  radially positioned over more than half the circumference

• Shaft Runout

  0.002 inches