2877111

Technical Characteristics

• Actuator Type

  double ended shaft

• Function Conformity Tolerance Per Section

  -0.40/+0.40 single section

• Electrical Resistance Per Section

  5.000 percent, rated amperes c and better finish

• Features Provided

  nonmetallic shaft

• Mounting Lip Depth

  0.08800 inches minimum and 0.09800 inches maximum

• Shaft Diameter

  0.250 inches nominal

• Overall Length

  2.531 inches minimum and 2.655 inches maximum

• Shaft Radial Play

  0.001 inches

• Body Style

  cylindrical servo mounted

• Pilot Diameter Runout

  0.00100 inches

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Mounting Lip Diameter

  1.42700 inches minimum and 1.44200 inches maximum

• Electrical Resistance Per Section

  5.000 percent, rated amperes c and better industrial clears

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Body Length

  1.739 inches minimum and 1.749 inches maximum

• Test Data Document

  10001-2877111 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Reliability Indicator

  not established

• Shaft Style

  round, slotted

• Shaft Bearing Type

  ball

• Section Quantity

  2

• Overall Diameter

  1.813 inches minimum and 1.828 inches maximum

• Power Dissipation Rating Per Section In Watts

  2.0 free air single section

• Special Features

  external fixed resistor mtd across terminal 1 and 4 each section

• Actuator Travel Control Feature

  continuous motion

• Lateral Runout

  0.003 inches

• Mounting Method

  clamp ring

• Undercut Width

  0.07300 inches minimum and 0.07800 inches maximum

• Shaft End Play

  0.00250 inches

• Terminal Location

  radially positioned over less than half the circumference

• Maximum Running Torque

  1.35 inch-ounces

• Shaft Runout

  0.001 inches

• Pilot Diameter

  1.31200 inches minimum and 1.31250 inches maximum

• Undercut Diameter

  1.303 inches minimum and 1.313 inches maximum

• Terminal Type And Quantity

  4 turret

• Effective Electrical Rotation In Deg Angular Rotation

  349.0 minimum

• Function Conformity Per Section

  single section absolute conformity

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 2nd section

• Pilot Length

  0.05700 inches minimum and 0.06700 inches maximum

• Maximum Starting Torque

  1.80 inch-ounces

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -150.0/+150.0 single section

• Function Characteristic Per Section

  single section table

• Body Diameter

  1.458 inches minimum and 1.468 inches maximum

• Shaft Length

  0.750 inches nominal