CP11-209A

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Pilot Diameter

  1.8750 inches nominal

• Power Dissipation Rating Per Section In Watts

  1.5 free air single section

• Rotary Actuator Travel In Angular Deg

  350.0 nominal

• Shaft Bearing Type

  ball

• Actuator Type

  double ended shaft

• Effective Electrical Rotation In Deg Angular Rotation

  340.0 nominal

• Function Conformity Per Section

  single section independent linearity

• Mounting Lip Depth

  0.0620 inches nominal

• Tap Location Tolerance Per Section

  -2.0/+2.0 ohms single section

• Mounting Lip Diameter

  2.0000 inches nominal

• Mounting Hole/Stud Circle Diameter

  1.250 inches nominal

• Shaft Style

  round

• Mounting Facility Quantity

  3

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Body Length

  1.062 inches nominal

• Shaft Radial Play

  0.001 inches

• Maximum Stop Torque

  160.00 inch-ounces

• Body Style

  cylindrical servo mounted

• Fixed Tap Quantity Per Section

  1 single section

• Function Conformity Tolerance Per Section

  -0.20/+0.20 single section

• Pilot Diameter Runout

  0.0015 inches

• Undercut Width

  0.0780 inches nominal

• Overall Length

  1.812 inches nominal

• Body Diameter

  2.000 inches nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Shaft Diameter

  0.125 inches nominal

• Pilot Length

  0.0620 inches nominal

• Reliability Indicator

  not established

• Screw Thread Series Designator

  unc

• Angle Of Mounting Hole In Deg

  90.0

• Terminal Location

  radially positioned over less than half the circumference

• Maximum Starting Torque

  0.50 inch-ounces

• Mounting Method

  threaded hole

• Shaft Runout

  0.001 inches

• Function Characteristic Per Section

  single section linear

• Terminal Type And Quantity

  4 turret

• Electrical Resistance Per Section

  4.0 kilohms single section

• Screw Thread Diameter

  0.164 inches nominal

• Test Data Document

  86197-64112004 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Shaft End Play

  0.004 inches

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Tap Location From Ccw Terminal Per Section In Ohms

  2000.0 single section

• Shaft Length

  0.500 inches nominal

• Angle Between Centerlines Of Mounting Holes In Deg

  120.0

• Section Quantity

  1

• Screw Thread Quantity Per Inch

  32.0

• Undercut Diameter

  1.87500 inches nominal