JL2U1042SD2032

Technical Characteristics

• Maximum Stop Torque

  192.00 inch-ounces (ounce-inches)

• Maximum Starting Torque

  6.00 inch-ounces (ounce-inches)

• Effective Electrical Rotation In Deg Angular Rotation

  312.0 nominal

• Actuator Type

  single shaft

• Mounting Bushing Length

  0.250 inches nominal

• Shaft Length

  0.500 inches nominal

• Body Diameter

  1.156 inches maximum

• Overall Length

  1.125 inches nominal

• Reliability Indicator

  not established

• Standard Taper Curve Per Section

  a single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Actuator Travel Control Feature

  stops

• Resistance Temp Characteristic Range Per Section In Percent

  m0.0/p8.0 -55 deg celsius single section and m0.0/p4.0 -25 deg celsius single section and m0.0/p2.0 0 deg celsius single section and m0.0/p0.0 25 deg celsius single section and m3.0/p3.0 85 deg celsius single section and m0.0/p6.0 120 deg celsius single

• ~1

  section

• Screw Thread Quantity Per Inch

  32.0

• Screw Thread Diameter

  0.375 inches nominal

• Nonturn Device Location

  at 3 oclock and at 9 oclock

• Terminal Type And Quantity

  3 tab,solder lug

• Special Features

  0.250 in long bushing

• Resistance Tolerance Per Section In Percent

  m20.0/p20.0 single section

• Power Dissipation Rating Per Section In Watts

  2.25 heat sink single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  120.0 single section

• Rotary Actuator Travel In Angular Deg

  312.0 nominal

• Electrical Resistance Per Section

  100.000 kilohms single section

• Mounting Method

  locking bushing

• Terminal Location

  radially positioned over less than half the circumference

• Screw Thread Series Designator

  unef

• Mechanical Backlash In Deg Angular Rotation

  1.500

• Nonturn Device Radius

  0.526 inches minimum and 0.536 inches maximum

• Overall Diameter

  1.484 inches maximum

• Body Length

  0.625 inches maximum

• Shaft Diameter

  0.248 inches minimum and 0.250 inches maximum

• Section Quantity

  1