10179966

Technical Characteristics

• Overall Diameter

  2.005 inches maximum

• Power Dissipation Rating Per Section In Watts

  1.5 free air single section

• Mounting Lip Diameter

  1.99750 inches nominal

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -400.0/+400.0 single section

• Body Length

  1.020 inches maximum

• Function Conformity Per Section

  single section independent linearity

• Maximum Starting Torque

  2.00 inch-ounces

• Electrical Resistance Per Section

  10.000 kilohms single section

• Shaft Style

  round

• Mounting Lip Depth

  0.06200 inches nominal

• Pilot Diameter

  1.87450 inches nominal

• Effective Electrical Rotation In Deg Angular Rotation

  357.0 minimum

• Test Data Document

  18876-10179966 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Body Style

  cylindrical servo mounted

• Pilot Diameter Runout

  0.00100 inches

• Fixed Tap Quantity Per Section

  1 single section

• Shaft Length

  0.562 inches nominal

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  80.0 single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Lateral Runout

  0.002 inches

• Overall Length

  1.582 inches maximum

• Actuator Type

  single shaft

• Pilot Length

  0.06200 inches nominal

• Actuator Travel Control Feature

  continuous motion

• Body Diameter

  1.437 inches nominal

• Shaft Radial Play

  0.003 inches

• Undercut Width

  0.07300 inches minimum

• Mounting Method

  clamp ring

• Tap Location From Ccw Terminal Per Section In Ohms

  5000.0 single section

• Terminal Location

  radially positioned over less than half the circumference

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Shaft Runout

  0.001 inches

• Function Characteristic Per Section

  single section linear

• Shaft Diameter

  0.2494 inches minimum and 0.2497 inches maximum

• Undercut Diameter

  1.87500 inches maximum

• Section Quantity

  1

• Tap Location Tolerance Per Section

  -0.5/+0.5 ohms single section