8123-16-1

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Fragility Factor

  moderately rugged

• Mounting Hole/Stud Circle Diameter

  1.203 inches nominal

• Shaft End Play

  0.005 inches

• Overall Length

  1.875 inches nominal

• Effective Electrical Rotation In Deg Angular Rotation

  1080.0 nominal

• Rotary Actuator Travel In Angular Deg

  1080.0 nominal

• Shaft Bearing Type

  ball

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Electrical Resistance Per Section

  10.0 kilohms single section

• Power Dissipation Rating Per Section In Watts

  3.0 free air single section

• Function Conformity Per Section

  single section independent linearity

• Mounting Lip Depth

  0.0620 inches nominal

• Body Diameter

  1.875 inches nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  85.0 single section

• Pilot Diameter

  1.8130 inches nominal

• Undercut Diameter

  1.844 inches nominal

• Pilot Diameter Runout

  0.001 inches

• Shaft Style

  round

• Mounting Facility Quantity

  3

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Maximum Running Torque

  0.90 inch-ounces

• Shaft Radial Play

  0.001 inches

• Body Style

  cylindrical servo mounted

• Lateral Runout

  0.001 inches

• Fixed Tap Quantity Per Section

  1 single section

• Tap Location Tolerance Per Section

  -15.0/+15.0 ohms single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Shaft Length

  0.625 inches nominal

• Pilot Length

  0.0620 inches nominal

• Undercut Width

  0.0620 inches nominal

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Overall Diameter

  2.241 inches maximum

• Angle Of Mounting Hole In Deg

  90.0

• Maximum Starting Torque

  1.30 inch-ounces

• Terminal Type And Quantity

  4 tab, solder lug

• Shaft Runout

  0.0005 inches

• Tap Location From Ccw Terminal Per Section In Ohms

  5000.0 single section

• Terminal Location

  radially positioned over less than half the circumference

• Mounting Method

  unthreaded hole

• Mounting Hole Diameter

  0.120 inches nominal

• Function Conformity Tolerance Per Section

  -0.25/+0.25 single section

• Body Length

  1.250 inches nominal

• Function Characteristic Per Section

  single section linear

• Contact Arm Electrical Off Position

  fully ccw

• Shaft Diameter

  0.2497 inches nominal

• Angle Between Centerlines Of Mounting Holes In Deg

  120.0

• Section Quantity

  1

• Mounting Lip Diameter

  1.8750 inches nominal