AP12-1R2276-1

Technical Characteristics

• Pole Quantity

  2

• Thread Series Designator

  unc

• Reset Method

  manual

• Mounting Facility Type And Quantity

  1 threaded bushing w/panel seal

• Switch Location And Position Designation

  internal at pole two

• Trip Release Characteristic

  time delay all locations

• Center To Center Distance Between Terminals Parallel To Width

  0.625 inches nominal

• Actuator Function

  trip-reset

• Internal Trip Release Configuration

  series trip all locations

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  1000.0 ac all locations

• Thread Quantity Per Inch

  32

• Trip Release Method

  magnetic-hydraulic all locations

• Switch Terminal Type

  tab, solder lug

• Circuit Protection Type

  overcurrent all locations

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  125.0 all locations

• Mounting Surface To Terminal End Distance

  1.780 inches maximum

• Inclosure Protection Type For Which Designed

  hermetically sealed

• Terminal Type And Quantity

  4 wire hook

• Switch Contact Arrangement

  single pole, double throw

• Center To Center Distance Between Terminals Parallel To Length

  0.875 inches nominal

• Body Style

  multipole-single actuator type

• Case Material

  metal

• Maximum Continuous Load Current Rating Per Pole

  5.0 amperes ac all locations

• Manual Actuator Type And Quantity

  1 toggle

• Nominal Thread Size

  0.138 inches

• Frequency In Hertz

  60.0 all locations

• Body Length

  1.500 inches maximum

• Actuator Position Designation

  between pole one and two

• Main Contact Tripping Mechanism Type

  trip free

• Switch Current Rating And Type In Amps

  0.5 ac and 0.5 dc

• Body Width

  1.250 inches maximum

• Switch Voltage Rating And Type In Volts

  120.0 ac and 50.0 dc

• Operating Voltage Type And Rating Per Pole In Volts

  120.0 ac all locations

• Auxiliary Switch Function And Quantity

  1 alarm

• Special Features

  w/internal flywheel delay

• Trip Delay Time In Seconds Per Rated Continuous Current

  0.200 minimum at 200 pct all locations and 5.500 maximum at 200 pct all locations

• Bushing Length

  0.380 inches maximum