3200-1208-2

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Shaft Length

  0.414 inches nominal

• Shaft End Play

  0.005 inches

• Switch Operating Position

  440 deg rotation from cw and ccw end

• Features Provided

  switch

• Function Conformity Per Section

  single section absolute linearity

• Electrical Resistance Per Section

  10.0 kilohms single section

• Switch Type

  rotary

• Power Dissipation Rating Per Section In Watts

  0.8 free air single section

• Function Conformity Tolerance Per Section

  -2.00/+2.00 single section

• Mounting Lip Diameter

  0.8750 inches nominal

• Mounting Lip Depth

  0.0620 inches nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  85.0 single section

• Undercut Diameter

  0.781 inches maximum

• Pilot Diameter Runout

  0.001 inches

• Switch Current Type And Rating In Amps

  1.500 dc

• Shaft Style

  round

• Pilot Diameter

  0.7500 inches nominal

• Shaft Radial Play

  0.001 inches

• Body Style

  cylindrical servo mounted

• Lateral Runout

  0.001 inches

• Fixed Tap Quantity Per Section

  1 single section

• Rotary Actuator Travel In Angular Deg

  3600.0 nominal

• Switch Voltage Rating In Volts

  28.0

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Overall Length

  3.633 inches maximum

• Shaft Diameter

  0.125 inches nominal

• Pilot Length

  0.0620 inches nominal

• Undercut Width

  0.0620 inches nominal

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Effective Electrical Rotation In Deg Angular Rotation

  3130.0 nominal

• Maximum Starting Torque

  1.30 inch-ounces

• Test Data Document

  00724-10-00253-000 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Mounting Method

  clamp ring

• Switch Contact Arrangement

  single pole, single throw, normally open, both positions maintained

• Terminal Location

  radially positioned over less than half the circumference

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Shaft Runout

  0.001 inches

• Terminal Type And Quantity

  8 turret

• Body Length

  3.187 inches maximum

• Overall Diameter

  0.875 inches nominal

• Body Diameter

  0.875 inches nominal

• Function Characteristic Per Section

  single section table

• Section Quantity

  1