NL5713-1479-0

Technical Characteristics

• Power Dissipation Rating Per Section In Watts

  2.0 free air all sections

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 2nd section

• Pilot Diameter

  2.8750 inches maximum

• Shaft Style

  round, slotted

• Shaft Bearing Type

  ball

• Actuator Type

  double ended shaft

• Function Characteristic Per Section

  cold rolled 12th primary

• Section Quantity

  7

• Maximum Running Torque

  3.60 inch-ounces

• Precious Material

  gold

• Precious Material And Location

  terminal surfaces gold

• Test Data Document

  10001-2552844 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Resistance Tolerance Per Section In Percent

  -1.0/+1.0 3rd section

• Function Characteristic Per Section

  8 oclock all primaries

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 4th section

• Function Characteristic Per Section

  drawn and pickled 12th primary

• Fixed Tap Quantity Per Section

  1 2nd section

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 5th section

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 6th section

• Special Features

  sections 1,4,and 5 each have a 5k ohm wiper load; sections 2,6,and 7 each have a resistance element located across the tap

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 7th section

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -150.0/+150.0 all sections

• Undercut Diameter

  2.875 inches maximum

• Shaft Diameter

  0.2494 inches minimum and 0.2497 inches maximum

• Electrical Resistance Per Section

  5.0 kilohms all sections

• Function Characteristic Per Section

  12 oclock 12th primary

• Maximum Starting Torque

  5.90 inch-ounces

• Function Characteristic Per Section

  10 oclock 12th primary

• Fixed Tap Quantity Per Section

  1 6th section

• Mounting Lip Depth

  0.0930 inches nominal

• Undercut Width

  0.0730 inches minimum

• Fixed Tap Quantity Per Section

  1 7th section

• Function Conformity Per Section

  all sections absolute conformity

• Body Style

  cylindrical servo mounted

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 all sections

• Function Conformity Tolerance Per Section

  -0.50/+0.50 2nd section

• Function Characteristic Per Section

  9 oclock 12th primary

• Function Conformity Tolerance Per Section

  -0.50/+0.50 3rd section

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  345.0 2nd section

• Terminal Type And Quantity

  24 tab, solder lug

• Body Length

  4.500 inches maximum

• Shaft Length

  0.625 inches nominal

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 1st section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 all sections

• Mounting Lip Diameter

  3.0000 inches nominal

• Body Diameter

  3.031 inches maximum

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  345.0 6th section

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Function Conformity Tolerance Per Section

  -0.50/+0.50 7th section

• Pilot Length

  0.0620 inches nominal

• Reliability Indicator

  not established

• Actuator Travel Control Feature

  continuous motion

• Shaft End Play

  0.0025 inches

• Mounting Method

  clamp ring

• Function Conformity Tolerance Per Section

  -1.00/+1.00 1st section

• Effective Electrical Rotation In Deg Angular Rotation

  358.0 nominal

• Function Conformity Tolerance Per Section

  -0.25/+0.25 6th section

• Overall Length

  5.250 inches maximum

• Terminal Location

  radially positioned over less than half the circumference

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  0.0 7th section

• Shaft Runout

  0.001 inches

• Function Characteristic Per Section

  11 oclock 5th primary

• Features Provided

  humidity proof

• Function Conformity Tolerance Per Section

  -1.00/+1.00 4th section

• Function Conformity Tolerance Per Section

  -1.00/+1.00 5th section