1905M2-7NP

Technical Characteristics

• ~1

  type data on certain environmental and performan

• Test Data Document

  81349-mil-s-3786/4 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general

• Throw Quantity

  7 each section rear

• Switch Actuator Stop Device Type

  fixed stop single actuator

• Individual Section Quantity

  2

• Pole Quantity

  1 each section front

• Contact Load Current Rating

  3.0 amperes resistive load ac at sea level

• Shaft Length

  0.834 inches minimum single actuator and 0.914 inches maximum single actuator

• Flat Height

  0.215 inches minimum single actuator and 0.221 inches maximum single actuator

• Contact Load Current Rating

  1.0 amperes resistive load dc at sea level

• Shaft Flat/Slot Angular Location

  195.0 degrees from nonturn device single actuator

• Switch Actuator Positioning Increment

  30.0 degrees single actuator

• Nonturn Device Radius

  0.360 inches minimum at 3:00 o'clock and 0.390 inches maximum at 3:00 o'clock

• Rotor Through Connection Quantity

  1 each section

• Shaft Diameter

  0.248 inches minimum single actuator and 0.251 inches maximum single actuator

• Detent Rotational Torque Range

  +8.000/+115.000 inch-ounces single actuator

• Thread Series Designator

  unef single mounting facility

• Switch Contact Basic Design

  nonpile-up symmetrical

• Terminal Type

  tab, solder lug

• Operating Temp Range

  -65.0/+85.0 deg celsius

• Nonturn Device Type

  tab at 3:00 o'clock

• Thread Class

  2a single mounting facility

• Hazardous Locations/Environmental Protection

  watertight

• Switch Actuator Indexing Position Quantity

  7 single actuator

• Overall Length

  2.344 inches minimum and 2.424 inches maximum

• First Flat Length

  0.230 inches minimum single actuator and 0.270 inches maximum single actuator

• Mounting Method

  threaded bushing w/panel seal single mounting facility

• Shaft Type

  round, flatted single actuator

• Overall Diameter

  1.306 inches maximum

• Contact Voltage Rating In Volts

  30.0 dc at sea level

• Nominal Thread Size

  0.375 inches single mounting facility

• Style Designator

  tap, circular, bushing mount

• Err Default

  err default and err default

• Contact Switching Action

  breaks before makes each section rear

• Contact Voltage Rating In Volts

  115.0 ac at sea level