5617-1008-0

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Pilot Diameter

  1.8750 inches nominal

• Shaft End Play

  0.005 inches

• Terminal Location

  longitudinally positioned on the circumference

• Maximum Running Torque

  0.60 inch-ounces

• Undercut Diameter

  2.000 inches nominal

• Shaft Bearing Type

  ball

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Power Dissipation Rating Per Section In Watts

  3.5 free air single section

• Function Conformity Per Section

  single section independent linearity

• Mounting Hole/Stud Circle Diameter

  1.250 inches nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  85.0 single section

• Effective Electrical Rotation In Deg Angular Rotation

  356.0 nominal

• Maximum Starting Torque

  0.80 inch-ounces

• Body Length

  1.020 inches nominal

• Shaft Style

  round

• Mounting Lip Depth

  0.0930 inches nominal

• Mounting Facility Quantity

  3

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Shaft Diameter

  0.250 inches nominal

• Body Style

  cylindrical servo mounted

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Body Diameter

  2.000 inches nominal

• Pilot Diameter Runout

  0.00150 inches

• Shaft Radial Play

  0.002 inches

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Terminal Type And Quantity

  3 solder stud

• Angle Of Mounting Hole In Deg

  45.0

• Pilot Length

  0.0620 inches nominal

• Undercut Width

  0.0620 inches nominal

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Shaft Length

  1.375 inches nominal

• Electrical Resistance Per Section

  50.0 kilohms single section

• Mounting Lip Diameter

  2.0160 inches nominal

• Lateral Runout

  0.006 inches

• Mounting Method

  unthreaded hole

• Shaft Runout

  0.001 inches

• Function Characteristic Per Section

  single section linear

• Function Conformity Tolerance Per Section

  -1.00/+1.00 single section

• Angle Between Centerlines Of Mounting Holes In Deg

  120.0

• Section Quantity

  1

• Mounting Hole Diameter

  0.129 inches nominal