7903906

Technical Characteristics

• Fragility Factor

  moderately rugged

• Shaft End Play

  0.005 inches

• Power Dissipation Rating Per Section In Watts

  1.5 free air single section

• Undercut Diameter

  0.975 inches maximum

• Maximum Running Torque

  0.60 inch-ounces

• Shaft Diameter

  0.1246 inches minimum and 0.1249 inches maximum

• Shaft Style

  round, slotted

• Shaft Bearing Type

  ball

• Actuator Type

  double ended shaft

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Effective Electrical Rotation In Deg Angular Rotation

  355.5 nominal

• Test Data Document

  93322-7903906 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Terminal Type And Quantity

  4 turret

• Body Diameter

  1.094 inches maximum

• Maximum Starting Torque

  0.60 inch-ounces

• Shaft Length

  0.290 inches minimum and 0.350 inches maximum

• Undercut Width

  0.0570 inches minimum

• Tap Location From Ccw Terminal Per Section In Ohms

  2500.0 single section

• Section Quantity

  1

• Body Length

  1.000 inches maximum

• Mounting Lip Diameter

  1.0570 inches minimum and 1.0670 inches maximum

• Electrical Resistance Per Section

  5.0 kilohms single section

• Function Conformity Per Section

  single section independent linearity

• Function Conformity Tolerance Per Section

  -0.015/+0.015 single section

• Tap Location Tolerance Per Section

  -125.0/+125.0 ohms single section

• Special Features

  rear shaft,slotted; 0.094 inches long nominal; 01249 inches diameter maximum

• Pilot Diameter Runout

  0.001 inches

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  60.0 single section

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Body Style

  cylindrical servo mounted

• Lateral Runout

  0.001 inches

• Fixed Tap Quantity Per Section

  1 single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Shaft Radial Play

  0.002 inches

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Reliability Indicator

  not established

• Actuator Travel Control Feature

  continuous motion

• Mounting Method

  clamp ring

• Mounting Lip Depth

  0.0570 inches minimum and 0.0670 inches maximum

• Terminal Location

  radially positioned over less than half the circumference

• Shaft Runout

  0.001 inches

• Pilot Diameter

  0.9683 inches minimum and 0.9688 inches maximum

• Features Provided

  humidity proof

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Function Characteristic Per Section

  single section linear