1289299

Technical Characteristics

• Test Data Document

  10001-1289299 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Effective Electrical Rotation In Deg Angular Rotation

  355.0 nominal

• Function Characteristic Per Section

  all sections equation

• Mounting Method

  clamp ring and threaded hole

• Section Quantity

  2

• Electrical Resistance Per Section

  10.0 kilohms all sections

• Mounting Lip Depth

  0.0620 inches nominal

• Mounting Lip Diameter

  2.0000 inches nominal

• Fixed Tap Quantity Per Section

  1 2nd section

• Body Length

  0.953 inches minimum and 0.983 inches maximum

• Mounting Hole/Stud Circle Diameter

  1.250 inches nominal

• Shaft Length

  0.605 inches minimum and 0.645 inches maximum

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Shaft Style

  round

• Mounting Facility Quantity

  3

• Function Conformity Per Section

  all sections absolute conformity

• Body Style

  cylindrical servo mounted

• Body Diameter

  2.000 inches nominal

• Tap Location Tolerance Per Section

  -1.0/+1.0 deg angular rotation 2nd section

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Pilot Length

  0.0620 inches nominal

• Undercut Width

  0.0620 inches nominal

• Actuator Type

  single shaft

• Function Conformity Tolerance Per Section

  -0.50/+0.50 all sections

• Reliability Indicator

  not established

• Power Dissipation Rating Per Section In Watts

  5.5 free air all sections

• Screw Thread Series Designator

  unc

• Pilot Diameter

  1.8740 inches minimum and 1.8750 inches maximum

• Actuator Travel Control Feature

  continuous motion

• Angle Of Mounting Hole In Deg

  90.0

• Terminal Location

  radially positioned over less than half the circumference

• Undercut Diameter

  1.874 inches minimum and 1.875 inches maximum

• Shaft Diameter

  0.2494 inches minimum and 0.2497 inches maximum

• Angle Between Centerlines Of Mounting Holes In Deg

  120.0

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  162.5 2nd section

• Screw Thread Quantity Per Inch

  32.0

• Terminal Type And Quantity

  7 turret

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  25.0 all sections

• Screw Thread Diameter

  0.164 inches nominal