MIL-R-27208/8

Technical Characteristics

• ~1

  data on certain environmental and performanc

• Fragility Factor

  moderately rugged

• Shaft Length

  0.036 inches minimum and 0.078 inches maximum

• Body Style

  rectangular w/mounting holes/slots

• Shaft Style

  round, slotted

• Overall Height

  0.815 inches nominal

• Body Height

  0.300 inches minimum and 0.330 inches maximum

• Overall Length

  1.308 inches nominal

• Center To Center Distance Between Terminal Rows

  0.090 inches minimum and 0.110 inches maximum

• Shaft Diameter

  0.100 inches minimum and 0.130 inches maximum

• Body Length

  1.240 inches minimum and 1.260 inches maximum

• Shaft Bearing Type

  sleeve

• Effective Electrical Rotation In Deg Angular Rotation

  7920.0 nominal

• Power Dissipation Rating Per Section In Watts

  0.75 7th secondary quality

• Terminal Location

  lower adjacent side two rows

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 single section

• Overall Width

  0.190 inches nominal

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Electrical Resistance Per Section

  5.000 percent, rated amperes c and better flooring

• Actuator Travel Control Feature

  clutch

• Mounting Method

  terminal and unthreaded hole

• Mounting Hole Diameter

  0.093 nominal inches

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Specification/Standard Data

  81349-mil-r-27208/8 government specification

• Mounting Facility Quantity

  2

• Maximum Running Torque

  8.00 inch-ounces

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• Standard Taper Curve Per Section

  a single section

• Terminal Length

  0.469 inches minimum and 0.531 inches maximum

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -50.0/+50.0 single section

• Features Provided

  humidity proof

• Terminal Type And Quantity

  3 pin

• Cubic Measure

  0.075 cubic inches

• Lateral Distance Between Mounting Hole Centers

  1.000 inches nominal

• Rotary Actuator Travel In Angular Deg

  7920.0 nominal

• Center To Center Distance Between Terminals

  0.290 inches minimum and 0.310 inches maximum

• Section Quantity

  1

• Maximum Starting Torque

  8.00 inch-ounces

• Body Width

  0.180 inches minimum and 0.200 inches maximum

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.690 nominal mils and 0.710 nominal centimeters

• Test Data Document

  81349-mil-r-27208 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type