1643580-310

Technical Characteristics

• Section Quantity

  1

• Overall Length

  1.254 inches minimum and 1.362 inches maximum

• Overall Height

  0.864 inches minimum and 0.926 inches maximum

• Mounting Hole Diameter

  0.093 inches nominal

• Shaft Diameter

  0.100 inches minimum and 0.140 inches maximum

• Body Height

  0.395 inches maximum

• Effective Electrical Rotation In Deg Angular Rotation

  6120.0 minimum and 9720.0 maximum

• Center To Center Distance Between Terminals

  0.690 inches minimum and 0.710 inches maximum

• Lateral Distance Between Mounting Hole Centers

  1.000 inches nominal

• Terminal Location

  lower adjacent side two rows

• Center To Center Distance Between Terminal Rows

  0.100 inches nominal

• Electrical Resistance Per Section

  10.0 kilohms single section

• Rotary Actuator Travel In Angular Deg

  6120.0 minimum and 9720.0 maximum

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.290 inches minimum and 0.310 inches maximum

• Resistance Tolerance Per Section In Percent

  m5.0/p5.0 single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• Test Data Document

  10001-1643580 drawing

• Reliability Indicator

  not established

• Terminal Length

  0.469 inches minimum and 0.531 inches maximum

• Overall Width

  0.235 inches minimum and 0.300 inches maximum

• Shaft Length

  0.036 inches minimum and 0.080 inches maximum

• Body Length

  1.218 inches minimum and 1.282 inches maximum

• Body Width

  0.235 inches minimum and 0.300 inches maximum

• Actuator Type

  single shaft

• Maximum Starting Torque

  8.00 inch-ounces (ounce-inches)

• Mounting Facility Quantity

  2

• Mounting Method

  unthreaded hole

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 single section

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  m50.0/p50.0 single section

• Power Dissipation Rating Per Section In Watts

  0.75 free air single section

• Actuator Travel Control Feature

  clutch

• Standard Taper Curve Per Section

  a single section

• Terminal Type And Quantity

  3 pin