502-206

Technical Characteristics

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  3255.7 3rd section

• Fixed Tap Quantity Per Section

  3 single section

• Actuator Travel Control Feature

  stops

• Terminal Type And Quantity

  6 turret

• Maximum Running Torque

  0.60 inch-ounces

• Power Dissipation Rating Per Section In Watts

  2.0 free air single section

• Shaft Bearing Type

  ball

• Function Conformity Per Section

  single section independent linearity

• Mounting Lip Diameter

  0.8750 inches nominal

• Test Data Document

  18876-10243513 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Mounting Lip Depth

  0.0620 inches nominal

• Electrical Resistance Per Section

  1.0 kilohms single section

• Shaft Diameter

  0.1248 inches nominal

• Tap Location Tolerance Per Section

  -1.0/+0.1 ohms 2nd section

• Tap Location Tolerance Per Section

  -0.25/+0.25 ohms 1st section

• Shaft Style

  round

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Pilot Diameter

  0.7500 inches nominal

• Maximum Starting Torque

  0.90 inch-ounces

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  344.3 1st section

• Tap Location Tolerance Per Section

  -0.25/+0.25 ohms 3rd section

• Shaft Radial Play

  0.001 inches

• Body Style

  cylindrical servo mounted

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Maximum Stop Torque

  100.00 inch-ounces

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -70.0/+70.0 single section

• Overall Diameter

  1.070 inches nominal

• Pilot Length

  0.0620 inches nominal

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  1800.0 2nd section

• Actuator Type

  single shaft

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 nominal

• Special Features

  rear 0.62 in. by 0.62 in. slotted shaft flush with case

• Shaft End Play

  0.002 inches

• Reliability Indicator

  not established

• Mounting Method

  clamp ring

• Terminal Location

  radially positioned over less than half the circumference

• Shaft Runout

  0.001 inches

• Overall Length

  2.030 inches nominal

• Rotary Actuator Travel In Angular Deg

  3602.0 nominal and 3606.0 maximum

• Function Characteristic Per Section

  single section linear

• Body Diameter

  0.875 inches nominal

• Shaft Length

  0.500 inches nominal

• Function Conformity Tolerance Per Section

  -0.075/+0.075 single section

• Undercut Diameter

  0.750 inches nominal

• Undercut Width

  0.0570 inches minimum

• Section Quantity

  1

• Body Length

  1.500 inches nominal