1202438-2

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Effective Electrical Rotation In Deg Angular Rotation

  0.309 minimum and 0.315 maximum

• Power Dissipation Rating Per Section In Watts

  2.0 free air all sections

• Shaft Length

  0.860 inches minimum and 0.900 inches maximum

• Section Quantity

  2

• Standard Taper Curve Per Section

  a all sections

• Terminal Length

  0.315 inches maximum

• Terminal Location

  radially positioned over less than half the circumference

• Test Data Document

  10001-1202438 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Body Diameter

  1.170 inches nominal

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 all sections

• Screw Thread Quantity Per Inch

  32.0

• Body Length

  1.280 inches maximum

• Mounting Method

  locking bushing

• Nonturn Device Location

  at 9 oclock

• Mounting Bushing Length

  0.360 inches minimum and 0.400 inches maximum

• Screw Thread Series Designator

  unef

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 2nd section

• Actuator Type

  single shaft

• Mechanical Backlash In Deg Angular Rotation

  2.5

• Nonturn Device Radius

  0.510 inches minimum and 0.550 inches maximum

• Electrical Resistance Per Section

  100.000 ohms c and better industrial clears

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -300.0/+300.0 all sections

• Electrical Resistance Per Section

  100.000 ohms c and better finish

• Overall Length

  2.180 inches maximum

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  120.0 all sections

• Screw Thread Diameter

  0.375 inches nominal

• Rotary Actuator Travel In Angular Deg

  309.0 minimum and 315.0 maximum

• Maximum Starting Torque

  9.00 inch-ounces

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 1st section

• Shaft Style

  round, slotted

• Body Style

  cylindrical bushing mounted

• Terminal Type And Quantity

  6 eyelet

• Overall Diameter

  1.485 inches maximum

• Shaft Diameter

  0.248 inches minimum and 0.250 inches maximum