900486-547

Technical Characteristics

• Center To Center Distance Between Terminals Parallel To Length

  1.938 inches nominal

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

  2.062 inches nominal

• Terminal Type And Quantity

  6 threaded stud

• Fragility Factor

  moderately rugged

• Center To Center Distance Between Terminals Parallel To Width

  0.750 inches nominal

• Special Handling Feature

  magnetic

• Pole Quantity

  3

• Circuit Protection Type

  overcurrent all locations

• Thread Series Designator

  unc

• Actuator Position Designation

  at each pole

• Reset Method

  manual

• Trip Delay Time In Seconds Per Rated Continuous Current

  0.130 minimum at 200 pct all locations and 0.700 maximum at 200 pct all locations

• Storage Type

  general purpose warehouse

• Trip Release Characteristic

  time delay all locations

• Actuator Function

  trip-reset

• Inclosure Protection Type For Which Designed

  explosion resistant

• External Actuator Linkage Arrangement

  one, two, and three linked

• Maximum Continuous Load Current Rating Per Pole

  9.0 amperes ac all locations

• Internal Trip Release Configuration

  series trip all locations

• Thread Quantity Per Inch

  32

• Operating Voltage Type And Rating Per Pole In Volts

  240.0 ac all locations

• Trip Release Method

  magnetic-hydraulic all locations

• Body Style

  multipole-multiple actuator type

• Mounting Facility Type And Quantity

  6 threaded hole

• Nominal Thread Size

  0.138 inches

• Frequency In Hertz

  60.0 all locations

• Body Width

  2.250 inches nominal

• Mounting Surface To Terminal End Distance

  2.471 inches nominal

• Main Contact Tripping Mechanism Type

  trip free

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  115.0 all locations

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

  0.750 inches nominal

• Arc Quenching Method

  magnetic blowout

• Body Length

  2.500 inches nominal

• Boss Height

  0.140 inches nominal

• Ultimate Trip Time Per Pole In Seconds

  0.400 minimum all locations and 2.000 maximum all locations

• Thread Pitch Diameters

  +0.1177/+0.1214 inches

• Manual Actuator Type And Quantity

  3 toggle

• Test Data Document

  06481-900486 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  300.0 ac all locations

• Case Material

  plastic