378771-9

Technical Characteristics

• ~1

  data on certain environmental and performanc

• Shaft Diameter

  0.100 inches minimum and 0.130 inches maximum

• Shaft Bearing Type

  bearing

• Effective Electrical Rotation In Deg Angular Rotation

  6120.0 minimum and 9720.0 maximum

• Terminal Location

  lower adjacent side two rows

• Fragility Factor

  moderately rugged

• Shaft Length

  0.036 inches minimum and 0.080 inches maximum

• Body Style

  rectangular w/mounting holes/slots

• Shaft Style

  round, slotted

• Cubic Measure

  0.084 cubic inches

• Body Height

  0.300 inches minimum and 0.330 inches maximum

• Center To Center Distance Between Terminal Rows

  0.090 inches minimum and 0.110 inches maximum

• Center To Center Distance Between Terminals

  0.690 inches minimum and 0.710 inches maximum

• Power Dissipation Rating Per Section In Watts

  0.75 free air single section

• Lateral Distance Between Mounting Hole Centers

  0.995 inches minimum and 1.005 inches maximum

• Actuator Travel Control Feature

  clutch

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -100.0/+100.0 single section

• Mounting Facility Quantity

  2

• Maximum Running Torque

  8.00 inch-ounces

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.290 inches minimum and 0.310 inches maximum

• Standard Taper Curve Per Section

  a single section

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Terminal Length

  0.469 inches minimum and 0.531 inches maximum

• Mounting Method

  unthreaded hole

• Features Provided

  humidity proof

• Terminal Type And Quantity

  3 pin

• Body Length

  1.218 inches minimum and 1.282 inches maximum

• Rotary Actuator Travel In Angular Deg

  6120.0 minimum and 9720.0 maximum

• Specification/Standard Data

  81349-mil-r-22097/2 government specification

• Mounting Hole Diameter

  0.088 inches minimum and 0.098 inches maximum

• Section Quantity

  1

• Maximum Starting Torque

  8.00 inch-ounces

• Body Width

  0.180 inches minimum and 0.200 inches maximum

• Electrical Resistance Per Section

  5.0 kilohms single section

• Test Data Document

  81349-mil-r-22097 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type