D10-09-2K0HMS20K0HMS

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Power Dissipation Rating Per Section In Watts

  1.0 free air single section

• Body Length

  2.550 inches maximum

• Shaft End Play

  0.005 inches

• Function Conformity Tolerance Per Section

  -0.08/+0.08 2nd section

• Section Quantity

  2

• Function Conformity Tolerance Per Section

  -0.04/+0.04 1st section

• Shaft Style

  round, slotted

• Shaft Bearing Type

  ball

• Features Provided

  switch

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Test Data Document

  07217-629893 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Function Conformity Per Section

  single section absolute linearity

• Switch Type

  rotary

• Mounting Lip Diameter

  0.8750 inches nominal

• Mounting Lip Depth

  0.0620 inches nominal

• Body Diameter

  0.880 inches maximum

• Terminal Length

  any acceptable

• Undercut Diameter

  0.781 inches maximum

• Shaft Length

  0.655 inches maximum

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Pilot Diameter

  0.7500 inches nominal

• Overall Length

  3.205 inches maximum

• Body Style

  cylindrical servo mounted

• Overall Diameter

  1.065 inches maximum

• Electrical Resistance Per Section

  20.0 percent, rated amperes c and better industrial clears

• Shaft Diameter

  0.1247 inches nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Switch Operating Position

  start of linear movement

• Switch Voltage Rating In Volts

  30.0

• Shaft Radial Play

  0.002 inches

• Pilot Length

  0.0620 inches nominal

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Effective Electrical Rotation In Deg Angular Rotation

  3300.0 nominal

• Lateral Runout

  0.003 inches

• Terminal Type And Quantity

  9 turret

• Mounting Method

  clamp ring

• Switch Contact Arrangement

  single pole, single throw, normally open, both positions maintained

• Terminal Location

  radially positioned over less than half the circumference

• Shaft Runout

  0.001 inches

• Function Characteristic Per Section

  single section linear

• Electrical Resistance Per Section

  2.0 percent, rated amperes c and better finish

• Maximum Starting Torque

  1.50 inch-ounces

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Undercut Width

  0.0570 inches minimum

• Rotary Actuator Travel In Angular Deg

  3408.0 nominal

• Switch Current Type And Rating In Amps

  0.800 dc