78FTS190
Resistors
RESISTOR,VARIABLE,NONWIRE WOUND,PRECISION
78FTS190
RESISTOR,VARIABLE,NONWIRE WOUND,PRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Terminal Type And Quantity
4 tab,solder lug
-
Function Characteristic Per Section
single section linear
-
Actuator Travel Control Feature
continuous motion
-
Resistance Tolerance Per Section In Percent
m10.0/p10.0 single section
-
Rotary Actuator Travel In Angular Deg
360.0 nominal
-
Terminal Location
radially positioned over more than half the circumference
-
Shaft Radial Play
0.001 inches
-
Maximum Running Torque
0.10 inch-ounces (ounce-inches)
-
Effective Electrical Rotation In Deg Angular Rotation
340.0 nominal
-
Shaft Bearing Type
ball
-
Mounting Lip Depth
0.0620 inches nominal
-
Mounting Lip Diameter
0.7500 inches nominal
-
Body Length
0.750 inches maximum
-
Shaft Length
0.500 inches nominal
-
Shaft Diameter
0.1245 inches minimum and 0.125 inches maximum
-
Body Diameter
0.750 inches nominal
-
Overall Length
1.250 inches nominal
-
Pilot Length
0.0620 inches nominal
-
Pilot Diameter
0.6245 inches minimum and 0.6250 inches maximum
-
Section Quantity
1
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
70.0 single section
-
Tap Location From Ccw Terminal Per Section In Ohms
5000.0 single section
-
Tap Location Tolerance Per Section
m0.1/p0.1 ohms single section
-
Fixed Tap Quantity Per Section
1 single section
-
Function Conformity Per Section
single section independent linearity
-
Power Dissipation Rating Per Section In Watts
1.25 free air single section
-
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
m200.0/p200.0 single section
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
125.0 single section
-
Function Conformity Tolerance Per Section
m0.50/p0.50 single section
-
Electrical Resistance Per Section
10.0 kilohms single section
-
Mounting Method
clamp ring
-
Pilot Diameter Runout
0.001 inches
-
Lateral Runout
0.001 inches
-
Shaft Runout
0.001 inches
-
Shaft End Play
0.003 inches
-
Maximum Starting Torque
0.35 inch-ounces (ounce-inches)
-
Actuator Type
single shaft
-
Overall Diameter
0.925 inches nominal
-
Undercut Width
0.0570 inches minimum
-
Undercut Diameter
0.625 inches maximum
-
Reliability Indicator
not established