1600-795

Technical Characteristics

• Terminal Type And Quantity

  6 turret

• Section Quantity

  2

• Electrical Resistance Per Section

  5.000 percent, rated amperes c and better

• Shaft Length

  0.563 inches maximum

• Power Dissipation Rating Per Section In Watts

  1.0 7th secondary at 10'30 oclock

• Shaft Style

  round, slotted

• Shaft Bearing Type

  ball

• Actuator Type

  double ended shaft

• Overall Length

  2.213 inches maximum

• Body Diameter

  1.781 nominal centimeters

• Mounting Lip Diameter

  1.7500 inches nominal

• Maximum Running Torque

  0.70 inch-ounces

• Function Conformity Per Section

  all sections independent linearity

• Pilot Length

  0.0620 inches nominal

• Reliability Indicator

  not established

• Pilot Diameter Runout

  0.00200 inches

• Body Length

  1.650 inches maximum

• Special Features

  rear shaft is 0.125 inches long maximum by 0.250 inches nominal in diameter

• Overall Diameter

  2.500 inches maximum

• Actuator Travel Control Feature

  continuous motion

• Lateral Runout

  0.003 inches

• Function Characteristic Per Section

  6 oclock 12th primary

• Mounting Method

  clamp ring

• Shaft End Play

  0.00250 inches

• Terminal Location

  radially positioned over less than half the circumference

• Function Conformity Tolerance Per Section

  -0.25/+0.25 all sections

• Pilot Diameter

  1.5620 inches maximum

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -150.0/+150.0 all sections

• Shaft Runout

  0.002 inches

• Undercut Diameter

  1.625 inches maximum

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Shaft Radial Play

  0.002 inches

• Maximum Starting Torque

  1.10 inch-ounces

• Shaft Diameter

  0.250 inches maximum

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 all sections

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 all sections

• Body Style

  cylindrical servo mounted

• Effective Electrical Rotation In Deg Angular Rotation

  357.0 minimum

• Mounting Lip Depth

  0.0930 nominal inches

• Undercut Width

  0.0730 inches minimum

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Test Data Document

  10001-2552951 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)