2552951
Resistors
RESISTOR,VARIABLE,WIRE WOUND,PRECISION
2552951
RESISTOR,VARIABLE,WIRE WOUND,PRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Terminal Type And Quantity
6 turret
-
Section Quantity
2
-
Electrical Resistance Per Section
5.000 percent, rated amperes c and better
-
Shaft Length
0.563 inches maximum
-
Power Dissipation Rating Per Section In Watts
1.0 7th secondary at 10'30 oclock
-
Shaft Style
round, slotted
-
Shaft Bearing Type
ball
-
Actuator Type
double ended shaft
-
Overall Length
2.213 inches maximum
-
Body Diameter
1.781 nominal centimeters
-
Mounting Lip Diameter
1.7500 inches nominal
-
Maximum Running Torque
0.70 inch-ounces
-
Function Conformity Per Section
all sections independent linearity
-
Pilot Length
0.0620 inches nominal
-
Reliability Indicator
not established
-
Pilot Diameter Runout
0.00200 inches
-
Body Length
1.650 inches maximum
-
Special Features
rear shaft is 0.125 inches long maximum by 0.250 inches nominal in diameter
-
Overall Diameter
2.500 inches maximum
-
Actuator Travel Control Feature
continuous motion
-
Lateral Runout
0.003 inches
-
Function Characteristic Per Section
6 oclock 12th primary
-
Mounting Method
clamp ring
-
Shaft End Play
0.00250 inches
-
Terminal Location
radially positioned over less than half the circumference
-
Function Conformity Tolerance Per Section
-0.25/+0.25 all sections
-
Pilot Diameter
1.5620 inches maximum
-
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-150.0/+150.0 all sections
-
Shaft Runout
0.002 inches
-
Undercut Diameter
1.625 inches maximum
-
Rotary Actuator Travel In Angular Deg
360.0 nominal
-
Shaft Radial Play
0.002 inches
-
Maximum Starting Torque
1.10 inch-ounces
-
Shaft Diameter
0.250 inches maximum
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
125.0 all sections
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
40.0 all sections
-
Body Style
cylindrical servo mounted
-
Effective Electrical Rotation In Deg Angular Rotation
357.0 minimum
-
Mounting Lip Depth
0.0930 nominal inches
-
Undercut Width
0.0730 inches minimum
-
Resistance Tolerance Per Section In Percent
-5.0/+5.0 all sections
-
Test Data Document
10001-2552951 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)